GEAR-BEVEL 5M1706 - Caterpillar

INSTALLATION: A special tool, the 5P7419 Plug Installer, is used to install the plastic plugs in the rubber stoppers. At the time this tool was changed to use with the new clear plugs, a complete change was made in the design of the tool, but it is not necessary to order the later tool for use with the new plugs. A modification can be made to the earlier 5P7419 Plug Installer as shown in the illustration. This will permit the tool to be used for either the new or former plugs.
The 5P2415 Nozzle Assembly in the 5P2420 Lubrication and Testing Group can still be used with the new rubber stopper. The end of the nozzle tube fits loosely in the larger hole of the new stopper, but the shoulder on the nozzle will seal the opening if the nozzle is held tightly against the stopper. To use the nozzle, push it all the way into the stopper and hold it tightly.
New and former rubber stoppers and plugs.
Modification of earlier 5P7419 Plug Installer.