6D9619 GEAR (36 TEETH) Caterpillar parts
120
Rating:
Alternative (cross code) number:
CA6D9619
6D-9619
6D9619
CA6D9619
6D-9619
6D9619
Weight: 22 pounds 9 kg.
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$281.49
10 Apr 2022
US: Florida-Parts-Z
6D9619 - Gear (36 Teeth) fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$237.41
10 Apr 2022
US: QUALITY PARTS
Made to fit 6D9619 Gear Caterpillar
G&T Engine Parts 6D9619 Caterpillar Gear || Meets OEM Specs for Fit and Performance || This is a new item 6D9619 Gear Caterpillar || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 6D9619 Caterpillar Gear || Meets OEM Specs for Fit and Performance || This is a new item 6D9619 Gear Caterpillar || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$252.91
19 Mar 2019
Unknown: Unknown
Caterpillar 6D9619 Gear New
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 6D9619:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1131 Timing Pin (Crankshaft) 1
B 435-3146 Timing Pin (Camshaft) 1
C - Snap-on
650 Small Pry Bar 1 Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove" for the correct procedure.
Keep all parts clean and free from contaminants.Contaminants may cause rapid wear and shorten component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Remove the idler gear. Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Ensure that Tooling (A) remains in position during the removal and installation procedures for the camshaft gear.
Remove Tooling (B).
Illustration 1 g02945576
Remove bolts (3) from camshaft (4).
Remove camshaft timing ring (2) from dowels (5).
Use Tooling (C) in order to remove camshaft gear (1) from camshaft (4). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 390-1131 Timing Pin (Crankshaft) 1
B 435-3146 Timing Pin (Camshaft) 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
If Tooling (A) is not installed, install Tooling (A). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Illustration 2 g02945576
Illustration 3 g02945776
Illustration 4 g02945716
Illustration 5 g02945837
Lubricate the teeth of gear (1) with clean engine oil.
Align the timing mark on camshaft (4) in Position (V) with the timing mark on the front housing in Position (W).
Position camshaft gear (1) onto camshaft (4). Ensure that dowel (6) is installed into Hole (X) in the camshaft.
Ensure that the chamfered tooth on the crankshaft gear in Position (Y) is between the timing marks in Positions (Z) on the camshaft gear.
Install Tooling (B). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Install camshaft timing ring (2) onto dowels (5).
Install bolts (3) into camshaft (4). Tighten the bolts to a torque of 25 N m (221 lb in). End By:
Install the idler gear. Refer to Disassembly and Assembly, "Idler Gear - Install" for the correct procedure.
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1131 Timing Pin (Crankshaft) 1
B 435-3146 Timing Pin (Camshaft) 1
C - Snap-on
650 Small Pry Bar 1 Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove" for the correct procedure.
Keep all parts clean and free from contaminants.Contaminants may cause rapid wear and shorten component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Remove the idler gear. Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Ensure that Tooling (A) remains in position during the removal and installation procedures for the camshaft gear.
Remove Tooling (B).
Illustration 1 g02945576
Remove bolts (3) from camshaft (4).
Remove camshaft timing ring (2) from dowels (5).
Use Tooling (C) in order to remove camshaft gear (1) from camshaft (4). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 390-1131 Timing Pin (Crankshaft) 1
B 435-3146 Timing Pin (Camshaft) 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
If Tooling (A) is not installed, install Tooling (A). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Illustration 2 g02945576
Illustration 3 g02945776
Illustration 4 g02945716
Illustration 5 g02945837
Lubricate the teeth of gear (1) with clean engine oil.
Align the timing mark on camshaft (4) in Position (V) with the timing mark on the front housing in Position (W).
Position camshaft gear (1) onto camshaft (4). Ensure that dowel (6) is installed into Hole (X) in the camshaft.
Ensure that the chamfered tooth on the crankshaft gear in Position (Y) is between the timing marks in Positions (Z) on the camshaft gear.
Install Tooling (B). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Install camshaft timing ring (2) onto dowels (5).
Install bolts (3) into camshaft (4). Tighten the bolts to a torque of 25 N m (221 lb in). End By:
Install the idler gear. Refer to Disassembly and Assembly, "Idler Gear - Install" for the correct procedure.
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install" for the correct procedure.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
5D3220
GEAR SHIFT
120, 140
120, 140
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
3D9194
GEAR (16 TEETH)
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
12E, 140
12E, 140
12E, 140B, 14E
120, 120B, 12E, 140, 140B
3D9194
GEAR (16 TEETH)
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
6D6882
GEAR
16
16
120, 120B, 12E, 140, 140B