GEAR-OUTPUT TRANSFER 6I9696 - Caterpillar

(1) Clearance between the gear and the cover ... 0.094 to 0.137 mm (.0037 to .0054 in)(2) Clearance between the gear and the manifold ... 0.061 to 0.102 mm (.0024 to .0040 in)(3) Diameter of the shafts (new) ... 31.737 to 31.747 mm (1.2495 to 1.2499 in)(4) Bore of the manifold bearings (new) ... 31.778 to 31.793 mm (1.2511 to 1.2517 in)(5) Put rubber washer between bolt head and steel washer.Torque for the gear nut (not shown) ... 170 20 N m (125 15 lb ft) Bench TestBench test with SAE 10W oil at ... 49°C (120°F)Rotation is counterclockwise when seen from the drive gear.(6) Scavenge section (output) ... 129 L/min (34 U.S. gpm) With pump at ... 1800 rpmAt a pressure of ... 138 kPa (20 psi)(7) Transmission section (output) ... 105 L/min (27.3 U.S. gpm) With pump at ... 1800 rpmAt a pressure of ... 2068 kPa (300 psi)