GEAR (20 Teeth) 6S2653 - Caterpillar

Implement Control Levers Adjustment
The implement control lever position can be adjusted forward and backward. Select the desired position to allow full lever operation.
Before starting adjustment work of the implement control levers, be sure to put the hydraulic activation control lever in the LOCKED position to prevent any possibility of unexpected movement of machine.
View of the left console.1. Hold grip (1) and pull knob (2) up. Then move the sliding console forward or backward until left implement control lever (3) is placed in the desired position.2. When implement control lever (3) is moved to the desired position, release knob (2) and slightly move grip (1) back and forth until the sliding console is locked in this position.3. Visually check the adjusted position. Use the markings on top of cover (4) as reference points so implement control lever (3) can be returned to the same position. Adjust the right implement control lever in the same manner as that described for the left implement control lever. The left sliding console can move more distance than the right console to provide more space so that an operator can easily get on or off the machine.Seat
The operator's seat provided with this machine is in compliance with the appropriate class of ISO 7096.Seat Adjustment
Seat adjustment should be checked at the beginning of each shift or when changing operators.Always use the seat belt when operating the machine.Adjust the seat to allow for full pedal travel with the operator's back against the seat back.
The seat position can be adjusted forward or backward, upward or downward, and seat back tilt. Select the desired position to allow for full pedal and lever travel.Standard Seat
To adjust the seat suspension, turn knob (1) until the indicator reads the approximate mass of the operator within the range of 50 to 120 kg (110 to 265 lbs). Turning knob (1) clockwise increases the reading and turning the knob counterclockwise decreases the reading.Pull up and hold lever (2) to move the rear of the seat cushion upward or downward, as desired. Push down and hold lever (2) to move the front of the seat cushion up or down. Release the lever to hold the seat in the selected position.To adjust the seat back tilt, pull up and hold lever (3) and tilt the seat back to the desired position. Release the lever to lock the seat back in the selected position.To adjust the seat forward or backward, pull up and hold lever (4) and move the seat to the desired position. Release the lever to lock the seat in the selected position. The angle of each armrest (5) can be adjusted by operating the dial located on the bottom of each armrest. The armrest should be positioned upright when getting on or off the machine.The height and angle of headrest (6) (if equipped) can be adjusted. Hold the headrest with both hands and move it forward/backward or upward/downward to the desired position. When released, the headrest will remain in the selected position.A lumbar