GEAR (bevel 46 teeth) 6S8895 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Water and Temperature Resistant Grease 1 Start By:
Remove the water temperature regulator.
Illustration 1 g06129530
Remove left side engine panel (1).
Illustration 2 g06129479
Disconnect tube assembly (2) and hose (3).
Disconnect hose (4) and (5).
Illustration 3 g06129485
Remove tube assembly (6). Loosen clamp (7) and disconnect hose (8).
Loosen clamp (9) and position hose (10) out of the way.
Illustration 4 g06129487
Remove tube assembly (11). Loosen clamp (13) and remove the hose.
Remove bolt (12) and the elbow.
Illustration 5 g06129490
Loosen clamp (16) and disconnect hose (17).
Remove bolts (14) and elbow assembly (15).
Illustration 6 g06129497
Remove bolts (19) and water pump (18).
Illustration 7 g06129504
Remove O-ring seal (20) from water pump (18).
Illustration 8 g06129509
Remove seal (23).
Remove bolts (21) and inlet cover (22).
Illustration 9 g06129514
Remove O-ring seal (24) from inlet cover (22).Installation Procedure
Install water pump (18) in the reverse order of removal.
Apply Tooling (A) to all O-ring seals and seals in the installation procedure.