GEAR 6Y1001 - Caterpillar

you road a machine, consult your tire dealer for recommended tire pressures and for speed limitations.Limitations for TON-kilometer per hour (TON-mile per hour) must be obeyed .Consult your tire dealer for the speed limit of the tires that are used.When you travel for long distances, schedule stops to allow the tires and the components to cool. Stop for 30 minutes after every 32 km (20 miles) or after every hour.Perform a thorough daily inspection. Refer to Operation and Maintenance Manual, "Daily Inspection".Bring the engine coolant, the crankcase oil, and the transmission oil up to the correct levels.Inflate the tires to the correct pressure.Use a self-attaching inflation chuck to inflate the tire. Stand behind the tire tread while you inflate the tires.Reference: For more information, refer to the Operation and Maintenance Manual, "Tire Inflation Information".Check with the proper officials to obtain the required licenses and other similar items.Travel at a moderate speed. Observe all speed limitations when you road the machine. Carry the work tool as low to the ground as possible.Disable the controls for the work tool when the machine is roaded. For more information, refer to Operation and Maintenance Manual, "Operator Controls (Electrohydraulic Control Console)".