GEAR (51T) 7B9888 - Caterpillar

7B9888 GEAR (51T) Caterpillar parts 977D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7B9888
7B-9888
7B9888

Weight: 42 pounds 19 kg.

Buy GEAR (51T) 7B9888 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Show more prices Caterpillar parts

Compatible equipment models: 7B9888:

TRACK LOADER 977D Caterpillar

Number on catalog scheme: None

Caterpillar 7B9888 Parts scheme GEAR (51T)

For full view, you need register

Information:

1. Remove the clutch inspection cover from housing (3).2. Turn the flywheel until one plate and locknut (1) can be seen. Loosen the locknut (1) two turns. Hit the plate lightly to make sure it is loose.3. Turn the flywheel 180° and loosen the other plate and locknut (1) as in Step 2.4. Turn the adjusting ring (2) to increase tension of flywheel clutch control lever when engaging clutch. Turn adjusting ring (2) enough so that a force of 40 to 50 lbs. (180 to 220 N) is needed to engage the clutch. (Measure this force needed at the top of the flywheel clutch control lever without the handle).5. Tighten each of the two locknuts (1) against the plates.6. Install the clutch inspection cover to housing (3). After an adjustment is made to the flywheel clutch, it should be followed by an adjustment of the FLYWHEEL CLUTCH AND INTERLOCK LINKAGE.