7D1199 GEAR (24 Teeth) Caterpillar parts
14E
Rating:
Alternative (cross code) number:
CA7D1199
7D-1199
7D1199
CA7D1199
7D-1199
7D1199
Weight: 0.88 pounds 0 kg.
MOTOR GRADER,
Compatible equipment models: 7D1199:
Number on catalog scheme:
16
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the cooling system package.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03713565
Remove pin assembly (1).
Remove bolts (2) and the washers. Remove bolts (4) and the washers. Remove fuel cooler (3).
Illustration 2 g03713586
Remove bolts (5) and the washers. Remove bolts (7) and the washers.
Remove clip (6).
Illustration 3 g03713608
Disconnect cable (8) from refrigerant condenser (10).
Remove pin assemblies (9) and remove refrigerant condenser (10).
Illustration 4 g03713571
Remove pin assembly (12).
Remove clip (15).
Remove bolts (11) and the washers. Remove bolts (14) and the washers. Remove hydraulic oil cooler (13).
Illustration 5 g03713618
Remove braces (16).
Illustration 6 g03713656
Attach a suitable lifting device to aftercooler (17). The weight of aftercooler (17) is approximately 91 kg (201 lb).
Remove bolts (18) and the washers.
Illustration 7 g03713636
Remove bolts (19) and the washers. Use the suitable lifting device in order to lower and remove aftercooler (17). Installation Procedure
Install aftercooler (17) in the reverse order of removal.
Start By:
Remove the cooling system package.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03713565
Remove pin assembly (1).
Remove bolts (2) and the washers. Remove bolts (4) and the washers. Remove fuel cooler (3).
Illustration 2 g03713586
Remove bolts (5) and the washers. Remove bolts (7) and the washers.
Remove clip (6).
Illustration 3 g03713608
Disconnect cable (8) from refrigerant condenser (10).
Remove pin assemblies (9) and remove refrigerant condenser (10).
Illustration 4 g03713571
Remove pin assembly (12).
Remove clip (15).
Remove bolts (11) and the washers. Remove bolts (14) and the washers. Remove hydraulic oil cooler (13).
Illustration 5 g03713618
Remove braces (16).
Illustration 6 g03713656
Attach a suitable lifting device to aftercooler (17). The weight of aftercooler (17) is approximately 91 kg (201 lb).
Remove bolts (18) and the washers.
Illustration 7 g03713636
Remove bolts (19) and the washers. Use the suitable lifting device in order to lower and remove aftercooler (17). Installation Procedure
Install aftercooler (17) in the reverse order of removal.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
12F, 14E
12F, 140B, 14E, 1673C, D6C
14E, 572G, 627, 627B, 637B, 637D, 977K, 977L, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
14E, 572G, D7G, D7G2
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
12F, 140, 14E
120B, 12E, 12F, 140, 140B, 14E
12F, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 14E
6D8286
GEAR ASSEM. (41 Teeth)
12F, 14E
12F, 14E
2D7618
GEAR
140B, 14E
140B, 14E
2D7619
GEAR
140B, 14E
140B, 14E
120B, 12E, 14E
120B, 12E, 14E