7G2517 GEAR,PLANETARY Caterpillar parts
D7F
Rating:
Alternative (cross code) number:
CA7G2517
7G-2517
7G2517
CA7G2517
7G-2517
7G2517
Weight: 3 pounds 1 kg.
TRACK-TYPE TRACTOR,
Related part:
7G2517
GEAR-PLANET-YM
2138747
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$38.50
06 Jun 2022
Amazon.com
7G2517 Gear, Planetary Transmission - Fits: D7F
CGR Compatible Models - D7F || Related Items - 7M5731 5M2054 5M3941 || Interchange - 1M3046 2138747 || PLANETARY GEAR 30T
CGR Compatible Models - D7F || Related Items - 7M5731 5M2054 5M3941 || Interchange - 1M3046 2138747 || PLANETARY GEAR 30T
$24.85
23 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Gear 7G2517 New
$28.72
23 Jan 2019
381 Hundredths Pounds
CTP: CTP
7G2517 Gear Fits Caterpillar
Warranty
Warranty
Number on catalog scheme:
16
For full view, you need register
Compatible equipment models: 7G2517:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2
B 8T-5096 Dial Indicator Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Install the crankshaft main bearings dry when clearance checks are performed. Apply clean engine oil on the crankshaft main bearings for final assembly.
Install the upper halves of the crankshaft main bearings in the engine block.
Illustration 1 g01959415
Illustration 2 g01959414
Attach Tooling (A) and a suitable lifting device to crankshaft (4). The weight of the G3304B crankshaft is approximately 65 kg (145 lb). The weight of the G3306B crankshaft is approximately 85 kg (185 lb).
Place crankshaft (4) in the cylinder block. Ensure that the timing mark on crankshaft gear (1) is in alignment with the timing mark on camshaft gear (2).
Apply clean engine oil to the thrust plates and install the thrust plates in position. Install the lower halves of the crankshaft main bearings in main bearing caps (3). Note: Ensure that the part number on the main bearing cap is facing toward the front of the engine. Also, ensure that the number on the main bearing cap matches the number on the cylinder block on the left side of each main bearing cap.
Place main bearing caps (3) in position. Apply clean engine oil on the bolt threads and the face of the washers. Install the bolts. Tighten the bolts to torque of 41 4 N m (30 3 lb ft).
Place a mark on both the bolt heads and main bearing caps. Turn each bolt for an additional 90 degrees.
Check the end play of the crankshaft with Tooling (B). End play must be 0.122 to 0.579 mm (0.0048 to 0.0228 inch). End By:
Install the pistons and connecting rods.
Install the front housing.
Install the flywheel housing.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2
B 8T-5096 Dial Indicator Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Install the crankshaft main bearings dry when clearance checks are performed. Apply clean engine oil on the crankshaft main bearings for final assembly.
Install the upper halves of the crankshaft main bearings in the engine block.
Illustration 1 g01959415
Illustration 2 g01959414
Attach Tooling (A) and a suitable lifting device to crankshaft (4). The weight of the G3304B crankshaft is approximately 65 kg (145 lb). The weight of the G3306B crankshaft is approximately 85 kg (185 lb).
Place crankshaft (4) in the cylinder block. Ensure that the timing mark on crankshaft gear (1) is in alignment with the timing mark on camshaft gear (2).
Apply clean engine oil to the thrust plates and install the thrust plates in position. Install the lower halves of the crankshaft main bearings in main bearing caps (3). Note: Ensure that the part number on the main bearing cap is facing toward the front of the engine. Also, ensure that the number on the main bearing cap matches the number on the cylinder block on the left side of each main bearing cap.
Place main bearing caps (3) in position. Apply clean engine oil on the bolt threads and the face of the washers. Install the bolts. Tighten the bolts to torque of 41 4 N m (30 3 lb ft).
Place a mark on both the bolt heads and main bearing caps. Turn each bolt for an additional 90 degrees.
Check the end play of the crankshaft with Tooling (B). End play must be 0.122 to 0.579 mm (0.0048 to 0.0228 inch). End By:
Install the pistons and connecting rods.
Install the front housing.
Install the flywheel housing.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
143H, 14G, 14H NA, 1673C, 235, 235B, 3176B, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 350, 561D, 572G, 572R, 627B, 627E, 941, D4D, D4E, D4E SR, D5, D5B, D5E, D6D, D6E, D6E S...
120G, 12G, 140B, 140G, 14G, 1673C, 215, 225, 235, 3160, 3208, 3304, 3306, 518, 613B, 613C, 627B, 637D, 941, 950, 955L, CS-551, D4D, D4E, D5, D5B, D6C, D6D, D7F, D7G, PR-1000, PS-500
120G, 12G, 140B, 140G, 14G, 1673C, 215, 225, 235, 3160, 3208, 3304, 3306, 518, 613B, 613C, 627B, 637D, 941, 950, 955L, CS-551, D4D, D4E, D5, D5B, D6C, D6D, D7F, D7G, PR-1000, PS-500
1673, 1673B, 1673C, 215, 3304, 3306, 621R, 910, 931B, 941, 943, 950, 953, 966C, D330B, D333B, D4D, D4E, D5, D5B, D6C, D6D, D7F, D7G
D7F, G3306
572G, 977K, 983, 983B, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
572G, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
14E, 941, 966C, 977K, D6C, D7F
983, D7F
983, D7F
983, D7F
518, 627, 920, 930, 950, 966C, 980B, D7F
