GEAR ASSEMBLY IDLER AND BALANCE WEIGHT 7N2485 - Caterpillar

Failure to comply to the rated load can cause possible personal injury or attachment damage. Review the rated load of a particular attachment before performing any operation. Make adjustments to the rated load as necessary.
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.Rated loads are based upon a standard machine with the following conditions:
Proper lubricants
Full fuel tank
Enclosed ROPS
80 kg (176 lb) operator
45/65-39 tires or equivalentRated loads will vary with different attachments. Consult your Caterpillar dealer about the rated load for specific attachments.The rated operating load is defined by SAE "J818" (May 1987) and by ISO 5998 (1986) as 50% of the full turn static tipping load.
Illustration 1 g00847624The dump clearance and the reach are given for each bucket at maximum lift height and at a 45 degree dumping angle. Dump clearance (A) is measured from the ground to the bucket edge. Reach (B) is measured from the front of the front tire to the bucket edge.The following table provides the rated operating loads for the standard machine configuration with a bucket.
Table 1
Rated Load (Standard Lift Arrangement)
Part Number (Bucket) Ground Engaging Tools Rated Volume Rated Operating Load Dump Clearance
A Reach
B
361-6110 Spade Rock with Teeth and Segments 8.6 m3 (11.2 yd3) 15875 kg (35000 lb) 4060 mm (160 inch) 2194 mm (86 inch)
361-6120 Spade Rock with Teeth and Segments 9.2 m3 (12.0 yd3) 15875 kg (35000 lb) 4012 mm (158 inch) 2241 mm (88 inch)
361-6140 Spade Rock with Teeth and Segments 10.0 m3 (13 yd3) 15875 kg (35000 lb) 3949 mm (155 inch) 2305 mm (91 inch)
361-6150 Spade Rock (Heavy Duty) with Teeth and Segments 8.6 m3 (11.2 yd3) 15875 kg (35000 lb) 4031 mm (159 inch) 2188 mm (86 inch)
Table 2
Rated Load (High Lift Arrangement)
Part Number (Bucket) Ground Engaging Tools Rated Volume Rated Operating Load Dump Clearance
A Reach
B
361-6110 Spade Rock with Teeth and Segments 8.6 m3 (11.2 yd3) 15875 kg (35000 lb) 4521 mm (178 inch) 2583 mm (102 inch)
361-6120 Spade Rock with Teeth and Segments 9.2 m3 (12.0 yd3) 15875 kg (35000 lb) 4473 mm (176 inch) 2630 mm (104 inch)
361-6140 Spade Rock with Teeth and Segments 10.0 m3 (13 yd3) 15875 kg (35000 lb) 4410 mm (174 inch) 2694 mm (106 inch)
361-6150 Spade Rock (Heavy Duty) with Teeth and Segments 8.6 m3 (11.2 yd3) 15875 kg (35000 lb) 4492 mm (177 inch) 2578 mm (101 inch)