GEAR-CAMSHAFT 7N9319 - Caterpillar

Removal Procedure
Disconnect batteries before performance of any service work.
Note: Before disconnecting the cable assemblies, mark the items for the proper connections in order to ensure correct assembly.
Illustration 1 g06112998
Disconnect the cable assemblies (1) from electric starting motor (2).This part number has three electric starting motors. Disconnect the cable assemblies between all three electric starting motors.
Attach a suitable lifting device to electric starting motor (2). The weight of the electric starting motor is 19.5 kg (43 lb).
Illustration 2 g06113164
Disconnect the cable assemblies (1) from the electric starting motor (2) on the opposite side of the engine.
Attach a suitable lifting device to electric starting motor (2). The weight of the electric starting motor is 19.5 kg (43 lb).
Illustration 3 g06113452
Remove Bolts (3) and (4 and remove electric starting motor.)
Illustration 4 g06113501
Remove bolts (3) and electric starting motor (2).Installation Procedure
Inspect the gasket for the joint between the electric starting motor and the flywheel housing. Obtain a new gasket, if necessary.
Illustration 5 g06113567
Install electric starting motor (2) and cable assemblies (1) in reverse order of removal.
Tighten nuts (5) and (6) to a torque of 35. 5 N m (26 4 lb ft).