GEAR-RING 7T9031 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5663 Lifting Eye Assembly 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02036315
Install integral seal (5).
Illustration 2 g03050220
If the 397-4038 Valve Lifter (3) is being used, install dowels (3A) into the cylinder block.
Illustration 3 g02036314
Illustration 4 g02036313
Attach Tooling (A) and a suitable lifting device onto valve lifter (3). Position valve lifter (3) onto the engine. Install bolts (4). Tighten bolts (4) to a torque of 55 10 N m (41 7 lb ft).
Position manifold shield (1) and install the washers and bolts (2).
Repeat Steps 1 and 3 for the manifold shield and the remaining valve lifters.End By:
Install the exhaust manifolds.
Install the rocker shaft and pushrods.