GEAR 7W0063 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     2P-8250     Strap Wrench Assembly     1    Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Drain the oil from the engine oil filter and engine oil filter base into a suitable container for storage or disposal.
Illustration 1 g00638826
Remove three bolts (1), the washers, and left cover (2) .
Illustration 2 g00638827
Use Tooling (A) to remove engine oil filter (5) from engine oil filter base (3). Remove four bolts (4) and engine oil filter base (3) from the oil cooler.