7Y0673 GEAR-RING Caterpillar parts
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
Rating:
Alternative (cross code) number:
CA7Y0673
7Y-0673
7Y0673
CA7Y0673
7Y-0673
7Y0673
Weight: 13 pounds 6 kg.
EXCAVATOR, UNDERCARRIAGE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$325.16
08 Jun 2024
US: FinditParts Inc
7Y0673 - GEAR fits Caterpillar (CAT)
BLUMAQ
BLUMAQ
Number on catalog scheme:
15
For full view, you need register
Compatible equipment models: 7Y0673:
Information:
Assembly Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01348858
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (5) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01348856
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (6). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01348740
Install the O-ring seal on elbow (6) and install elbow (6) on the engine oil cooler with the bolts.
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and elbow (8) on elbow (6).
Lubricate the O-ring seals with clean engine oil. Install the tube in bonnet (5).
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01348858
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (5) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01348856
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (6). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01348740
Install the O-ring seal on elbow (6) and install elbow (6) on the engine oil cooler with the bolts.
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and elbow (8) on elbow (6).
Lubricate the O-ring seals with clean engine oil. Install the tube in bonnet (5).
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Cat SIS web machinery list:
Parts gear Caterpillar catalog:
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
330B, 330B L, OEMS
325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
330B, 330B L, OEMS
330B, 330B L, OEMS
330, 330 FM L, 330 L, 330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, OEMS
330C, 345B, 345B II, 345B II MH, 345B L, 350, OEMS
330B L, OEMS
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
5525112
GEAR, SUN
FB221
FB221
5525120
GEAR, RING
FB221
FB221
1021287
GEAR, PINION
325, 325 L, FB221
325, 325 L, FB221
1218222
GEAR GP-BEARING
320 L, OEMS
320 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 330, 330 FM L, 330 L, OEMS