7Y0815 GEAR-SUN Caterpillar parts
365B, 375, 375 L, 5080
Rating:
Alternative (cross code) number:
CA7Y0815
7Y-0815
7Y0815
CA7Y0815
7Y-0815
7Y0815
Weight: 34 pounds 15 kg.
EXCAVATOR, FRONT SHOVEL,
Number on catalog scheme:
33
For full view, you need register
Information:
Procedure To Purge Air From Hydraulic Cylinders
Set the engine speed dial in position 1. Keep the setting throughout the procedure.
Slowly extend and retract the cylinder through approximately 75% of full cylinder travel. Repeat the sequence of cylinder extension and cylinder retraction two times. The cylinders must not be allowed to bottom out in either direction. Delay at least four seconds before the direction of the cylinder travel is reversed.
Slowly extend and retract the cylinder through approximately 90% of full cylinder travel. Repeat the sequence of cylinder extension and cylinder retraction six times. The cylinders must not be allowed to bottom out in either direction. Delay at least four seconds before the direction of the cylinder travel is reversed.
Slowly extend and retract the cylinder through full cylinder travel. Repeat the sequence of full cylinder travel two times. Do not allow hydraulic pressure to increase at the end of travel. Delay at least four seconds before the direction of the cylinder travel is reversed.
Check and maintain the level of the hydraulic fluid in the hydraulic tank. After the completion of the procedure, no additional special handling is necessary.
Set the engine speed dial in position 1. Keep the setting throughout the procedure.
Slowly extend and retract the cylinder through approximately 75% of full cylinder travel. Repeat the sequence of cylinder extension and cylinder retraction two times. The cylinders must not be allowed to bottom out in either direction. Delay at least four seconds before the direction of the cylinder travel is reversed.
Slowly extend and retract the cylinder through approximately 90% of full cylinder travel. Repeat the sequence of cylinder extension and cylinder retraction six times. The cylinders must not be allowed to bottom out in either direction. Delay at least four seconds before the direction of the cylinder travel is reversed.
Slowly extend and retract the cylinder through full cylinder travel. Repeat the sequence of full cylinder travel two times. Do not allow hydraulic pressure to increase at the end of travel. Delay at least four seconds before the direction of the cylinder travel is reversed.
Check and maintain the level of the hydraulic fluid in the hydraulic tank. After the completion of the procedure, no additional special handling is necessary.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75, 75E, 814F, 815F, 816F, 85E, 95E, 966G II, 972G II...
16G, 16H NA, 245, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D350E, D400E, D8N, D8R, D...
16G, 16H NA, 245, 245B, 3406, 3406B, 3406C, 3406E, 3456, 375, 375 L, 385B, 5080, 5090B, 578, 583R, 587R, 621, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 657B, 814B, 824C, 824G, 825G, ...
16G, 16H NA, 245, 245B, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D350E, D400E, D8N, D8R, D...
16G, 16H NA, 245, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D350E, D400E, D40D, ...
3408, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B, 578, 583R, 587R, 589, C-15, C-16, C15, C18, D10N, D10R, D10...
3408, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B, 578, 583R, 587R, 589, C-15, C-16, C15, C18, D10N, D10R, D10...
245, 3406B, 3406C, 3406E, 3408, 375, 375 L, 385B, 5080, 5090B, 578, 583R, C-15, C-16, C15, D8N, D8R, D8R II, D9T
365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 578, 583R, 587R, 587T, C-16, C18, D8N, PL87
365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 578, 583R, 587R, 587T, C-16, C18, D8N, PL87
365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 578, 583R, 587R, 587T, C-16, C18, D8N, PL87
235B, 375, 375 L, 385B, 5080, 572R, 578, 583R, D6H, D6H XL, D6H XR, D6R, D7H, D7R, D8N
7Y1090
GEAR-RING
365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
7Y0797
GEAR-RING
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
7Y0793
GEAR-SUN
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
7Y0792
GEAR-PLANETARY
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
4P9890
GEAR AS-DRIVE
375, 375 L, 385B, 5080
375, 375 L, 385B, 5080
2003486
GEAR-DRIVE
375, 375 L, 5080
375, 375 L, 5080
1026370
GEAR & BEARING GP-SWING
375, 5080
375, 5080
1026369
GEAR & BEARING GP-SWING
375, 5080
375, 5080
1026368
GEAR & BEARING GP-SWING
375, 5080
375, 5080
6I6312
GEAR-PLANETARY
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
7Y0813
GEAR-SUN
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080