7Y1428 GEAR-PLANETARY Caterpillar parts
318B, 320 L, 320B, 320N, OEMS
Rating:
Alternative (cross code) number:
CA7Y1428
7Y-1428
7Y1428
CA7Y1428
7Y-1428
7Y1428
Weight: 6 pounds 3 kg.
EXCAVATOR, UNDERCARRIAGE,
Related part:
7Y1428
GEAR-PLANET-YM
2888728
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$67.42
11 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Gear Planetary 7Y1428 New
$75.39
09 Feb 2019
CTP: CTP
7Y1428 - GEAR-PLANETARY fits Caterpillar (CAT)
Warranty
Warranty
$63.70
08 Jul 2021
7.1209[3.20] Pounds
US: IronDT
CTP Caterpillar Gear Planetary (7y1428) Aftermarket
CTP
CTP
Number on catalog scheme:
17
For full view, you need register
Information:
There are four individually adjustable setpoints which can be set anywhere within the range of the gauge. Press the "SETPTS" key in order to view the setpoints or change the setpoints. The setpoint for the RPM and for the annunciator "1" (indicating switch 1) will be shown on the display. In order to change the value, use the "UP" and "DOWN" keys to increase or decrease the value until the desired trip point for that switch is reached. Press the "ENTER" key in order to accept the new value and save the new value. Each press of the "SETPTS" key allows the operator to view the next setpoint of the following switches: 2, 3 and 4. Follow the same procedure in order to change the setpoints. Check the "As Shipped Drawings" for a particular engine for the correct setpoints. The "As Shipped Drawings" are contained in the Technical Manual.Note: The previous setpoints continue to be monitored when the gauge is in the setpoint mode. The new value is monitored only when the "ENTER" key is pressed. If no key is pressed for 20 seconds, the display will return to the normal mode. The configuration will then revert to the previous parameters.Note: Configure the unused setpoints to "HIGH". This configuration will prevent the display of an unused annunciator during normal operation. The setpoint must be well above the maximum operating speed. Lockout Function
The 150-7700 Tachometer incorporates a lockout function that will disable the" mode" key and the setpoint adjust keys. The lockout function for the "mode" key and for the setpoint adjust keys can be independently turned ON. The keys are turned to the OFF together.Note: In order to perform the procedures, the gauge must be powered and the gauge must be in the normal mode.Lock Out the "Mode"Key
Press and hold the "ENTER" key and the "ESC" key together. Then press the "MODE" key. The gauge will momentarily display "SAVE". Then, the display will return to the normal mode. The normal mode will disable the "mode" key and all of the associated setup and calibration functions.Lock Out Changes of the Setpoint Values
Press and hold the "ENTER" and "ESC" keys together. Then press the "SETPTS" key. The gauge will momentarily display "SAVE". Then, the display will return to the normal mode. The normal mode will allow the user to view the setpoint values but normal mode will lock out any changes.Unlock the Configuration, Calibration and Setpoints
Press and hold the "ENTER" and "ESC" keys together. Then, press the down key. The gauge will momentarily display "SAVE". Then, the display will return to the normal mode. The normal mode will allow the user to view the setpoint values but the normal mode will lock out any changes.
The 150-7700 Tachometer incorporates a lockout function that will disable the" mode" key and the setpoint adjust keys. The lockout function for the "mode" key and for the setpoint adjust keys can be independently turned ON. The keys are turned to the OFF together.Note: In order to perform the procedures, the gauge must be powered and the gauge must be in the normal mode.Lock Out the "Mode"Key
Press and hold the "ENTER" key and the "ESC" key together. Then press the "MODE" key. The gauge will momentarily display "SAVE". Then, the display will return to the normal mode. The normal mode will disable the "mode" key and all of the associated setup and calibration functions.Lock Out Changes of the Setpoint Values
Press and hold the "ENTER" and "ESC" keys together. Then press the "SETPTS" key. The gauge will momentarily display "SAVE". Then, the display will return to the normal mode. The normal mode will allow the user to view the setpoint values but normal mode will lock out any changes.Unlock the Configuration, Calibration and Setpoints
Press and hold the "ENTER" and "ESC" keys together. Then, press the down key. The gauge will momentarily display "SAVE". Then, the display will return to the normal mode. The normal mode will allow the user to view the setpoint values but the normal mode will lock out any changes.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
330B, 330B L, OEMS
325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
330B, 330B L, OEMS
330B, 330B L, OEMS
330, 330 FM L, 330 L, 330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, OEMS
330C, 345B, 345B II, 345B II MH, 345B L, 350, OEMS
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN,...
1275943
GEAR AS
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM...
1275941
GEAR AS-INTERNAL
305.5, 306, 307C, 307D, 308C, 308D, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, ...
305.5, 306, 307C, 307D, 308C, 308D, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, ...
2637398
GEAR AS-TIMING
315C, 317B LN, 318B, 933C, 939C
315C, 317B LN, 318B, 933C, 939C
1173284
GEAR-PUMP
315, 315B, 315C, 317B LN, 318B, 933C, 939C
315, 315B, 315C, 317B LN, 318B, 933C, 939C
301.5, CB-14
1336731
GEAR
311B, 312B, 315B FM L, 317B LN, 318B
311B, 312B, 315B FM L, 317B LN, 318B
1582456
GEAR GP-PLANETARY
317B LN, 318B
317B LN, 318B
318B, 320 L, 320B, 320N, OEMS
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
318B, 320 L, 320B, 320N, OEMS