GEAR GP-BEARING & 7Y1562 - Caterpillar

7Y1562 GEAR GP-BEARING & Caterpillar parts 320, 320 L, 320N

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7Y1562
7Y-1562
7Y1562

Buy GEAR GP-BEARING & 7Y1562 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 7Y1562:

EXCAVATOR 320 320 L 320N Caterpillar

Number on catalog scheme:

Caterpillar 7Y1562 Parts scheme GEAR GP-BEARING &

For full view, you need register

Information:

Result:No diagnostic codes are active.Results:
OK - No diagnostic codes are active, but a problem is suspected in the circuit for the fuel priming pump. Proceed to Test Step 5.
Not OK - A -6 diagnostic code is active at this time. Proceed to Test Step 2.
Not OK - A -5 diagnostic code is active at this time. Proceed to Test Step 3.Test Step 2. Create an Open at the Connector for the Fuel Pump Relay
Remove power from the ECM.
Turn the keyswitch to the OFF position.
Disconnect the connector F-C13 for the fuel pump relay.
Restore power to the ECM.
Turn the keyswitch to the ON position.
Select diagnostic tests from Cat ET.
Select the "Override Parameters" screen on Cat ET.
Activate the override for the fuel pump relay.
Monitor the active diagnostic code screen on Cat ET. Check and record any active diagnostic codes.Note: Wait at least 30 seconds in order for the diagnostic code to become active.
Deactivate the override for the fuel pump relay.
Monitor the active diagnostic code screen on Cat ET. Check and record any active diagnostic codes.Note: Wait at least 70 seconds in order for the diagnostic codes to become active.Expected Result:A -5 diagnostic code is now active for the fuel pump relay.Results:
OK - A -5 diagnostic code became active after disconnecting the connector F-C13.Repair: Temporarily install a new fuel pump relay. Verify that there are no active diagnostic codes for the fuel pump relay. Clear any logged diagnostic codes.STOP
Not OK - A -6 diagnostic code remains active. There is a short between the connector for the fuel pump relay and the ECM. Proceed to Test Step 4.Test Step 3. Create a Short at the Connector for the Fuel Pump Relay
Remove power from the ECM.
Turn the keyswitch to the OFF position.
Disconnect the connector for the fuel pump relay. Install a jumper wire between terminal E and terminal H at the connector for the fuel pump relay. Refer to Illustration 1 for the schematic of the circuit.
Restore power to the ECM.
Turn the keyswitch to the ON position.
Select diagnostic tests from Cat ET.
Select the "Override Parameters" screen on Cat ET.
Activate the override for the fuel pump relay.
Monitor the active diagnostic code screen on Cat ET. Check and record any active diagnostic codes.Note: Wait at least 30 seconds in order for the diagnostic code to become active.
Deactivate the override for the fuel pump relay.
Monitor the active diagnostic code screen on Cat ET. Check and record any active diagnostic codes.Note: Wait at least 70 seconds in order for the diagnostic codes to become active.Expected Result:A -6 diagnostic code is active when the jumper wire is installed.Results:
OK - The engine harness and the ECM are OK.Repair: Temporarily install a new fuel pump relay. Verify that there are no active diagnostic codes for the fuel pump relay. Clear any logged diagnostic codes.STOP
Not OK - The -5 diagnostic code remains active with the jumper in place. Verify that wire 229-BK on terminal H of the connector for the fuel pump relay has continuity to engine ground. If wire 229-BK is

Caterpillar SIS machinery equipment:

Caterpillar SIS

320, 320L TRACK-TYPE EXCAVATORS 1KL00001-UP (MACHINE) POWERED BY 3066 ENGINE » 7Y-1562 GEAR GP-BEARING &

320, 320L TRACK-TYPE EXCAVATORS 1TL00001-UP (MACHINE) POWERED BY 3116 ENGINE » 7Y-1562 GEAR GP - BEARING

320, 320L TRACK-TYPE EXCAVATORS 2DL00001-00213 (MACHINE) POWERED BY 3066 ENGINE » 7Y-1562 GEAR GP-BEARING &

320, 320L & 320N TRACK-TYPE EXCAVATORS 1XM00001-UP (MACHINE) POWERED BY 3066 ENGINE » 7Y-1562 GEAR & BEARING GP

Parts gear Caterpillar catalog:

7Y1565 GEAR & BEARING GP
320 L

7W4070 GEAR
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 5...

2W8147 GEAR
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 160K, 160M, 160M 2, 205B, 213B, 214B, 2290, 2390, 2391, 2491, 2590, 30/30, 3114, 3116, 3126, 3126B...

2W8476 GEAR AS-IDLER
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 325C, 330C L, 35, 446B, 446D, 45, 525B, 533, 535B, 5...

7W9740 GEAR AS-IDLER
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, ...

1W1064 GEAR-FLYWHEEL RING
3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325 LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D...

5I7674 GEAR
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321B, 321C, 323D L, 323D LN

5I7558 GEAR AS
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320...

1252950 GEAR AS
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 3...