GEAR 8H7820 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3546 Plate 1
A 8M-9012 Plate 1
B 5P-0960 Grease Cartridge 1
Illustration 1 g00862200
Illustration 2 g00623318
Place front trunnion support (1) in a suitable press. Make sure that the retainer side of the front trunnion support is facing upward.
Use Tooling (A) in order to install sleeve bearing (6) until the sleeve bearing is seated against the shoulder of front trunnion support (1).
Install O-ring seal (5).
Illustration 3 g00630003
Install retainer (2) and bolts (4).
Install O-ring seal (3).
Apply Tooling (B) to the O-ring seals and the sleeve bearing. End By:
Install the front trunnion support on the rear axle. Refer to Disassembly and Assembly, "Trunnion Support (Oscillating Axle, Front) - Install".