8K6732 GEAR (43 TEETH) Caterpillar parts
966C
Rating:
Alternative (cross code) number:
CA8K6732
8K-6732
8K6732
CA8K6732
8K-6732
8K6732
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$327.23
04 Feb 2022
US: Florida-Parts-Z
9K3413 - Radiator Guard Group 4K6213 2234807 8k6732 8K6732 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$256.91
27 Jan 2022
US: Florida-Parts-Z
4K6212 - Shaft (18 Teeth) 8K6732 6K5315 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 8K6732:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1 Start By:
Remove the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Before you begin the removal of the valve springs, refer to Specifications, "Cylinder Head Valves" and Testing and Adjusting, "Cylinder Head - Inspect" for appropriate information on the valve springs.
Do not turn the crankshaft while the valve springs are removed.
Ensure that the piston is at the top center position.
Illustration 1 g00825744
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use Tooling (A) to compress valve springs (1) . Remove valve keepers (2) .
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Release the pressure on Tooling (A) . Remove valve spring retainer (3) and valve springs (1) from the cylinder head.
Do not turn the crankshaft while the valve springs are removed.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00825744
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place new valve springs (1) into position on the cylinder head.Note: Ensure that the closed damper coils are toward the cylinder head if double valve springs are used.
Install valve spring retainer (3) .
Use Tooling (A) to compress valve springs (1) .
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Install valve keepers (2) in order to lock the valve springs in position.
Release the pressure slowly on Tooling (A) . Remove Tooling (A) . Strike the top of the valves with a soft faced hammer in order to ensure that the valve keepers are properly installed.End By: Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1 Start By:
Remove the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Before you begin the removal of the valve springs, refer to Specifications, "Cylinder Head Valves" and Testing and Adjusting, "Cylinder Head - Inspect" for appropriate information on the valve springs.
Do not turn the crankshaft while the valve springs are removed.
Ensure that the piston is at the top center position.
Illustration 1 g00825744
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use Tooling (A) to compress valve springs (1) . Remove valve keepers (2) .
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Release the pressure on Tooling (A) . Remove valve spring retainer (3) and valve springs (1) from the cylinder head.
Do not turn the crankshaft while the valve springs are removed.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00825744
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place new valve springs (1) into position on the cylinder head.Note: Ensure that the closed damper coils are toward the cylinder head if double valve springs are used.
Install valve spring retainer (3) .
Use Tooling (A) to compress valve springs (1) .
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Install valve keepers (2) in order to lock the valve springs in position.
Release the pressure slowly on Tooling (A) . Remove Tooling (A) . Strike the top of the valves with a soft faced hammer in order to ensure that the valve keepers are properly installed.End By: Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
966C, D5, D5B, D6H, D6H XL, D6H XR, D7H, D7R, D8R
950, 955L, 966C, D5, D5B
950, 955L, 966C, D5, D5B
814, 950, 955K, 955L, 966C, D5, D5B
814, 950, 955K, 955L, 966C, D5, D5B
518, 528, 613C, 613C II, 613G, 730, 730C, 814, 815, 950B, 950B/950E, 966C, D300E, D300E II, R1300, R1300G, R1300G II
518, 627, 920, 930, 950, 966C, 980B, D7F
518, 613, 613B, 815, 950, 966C
613, 950, 966C
815, 966C
815, 966C
1S5283
GEAR (24 Teeth)
824B, 825B, 980, 980B, 988
824B, 825B, 980, 980B, 988
9S2808
GEAR ASSEM. (32 and 37 Teeth)
824B, 825B, 988
824B, 825B, 988
16, 824B, 825B, 988
2M7090
GEAR (21 Teeth)
16, 824B, 825B, 988
16, 824B, 825B, 988
4M7128
GEAR (124 and 80 Teeth)
16, 824B, 825B, 988
16, 824B, 825B, 988
16, 824B, 825B, 988
