GEAR 8N1361 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 4 Start By:
Release the system pressure.
Illustration 1 g06315960
Remove bolts (2) and covers (1).
Illustration 2 g06315962
Disconnect Hose assemblies (3), (4), and (5).
Illustration 3 g06315963
Cut cable strap (10). Disconnect harness assembly (9) from hose assembly (8).
Disconnect hose assemblies (6). Remove bolt (7) and hose assembly (8).
Illustration 4 g06315964
Open door (11).
Illustration 5 g06315965
Illustration 6 g06315966
Remove cover (12). Cut cable straps (14).
Disconnect harness assemblies (13) and (15).
Illustration 7 g06315967
Remove guard (17) and floor mat (16).
Illustration 8 g06315968
Remove cover (18) and duct (19).
Illustration 9 g06315970
Remove duct (20).
Illustration 10 g06315971
Illustration 11 g06315994
Attach Tooling (A) and a suitable lifting device to cab (21). The weight of cab (21) is approximately 171 kg (377 lb). Remove bolts (22) and cab (21).Installation Procedure
Install the cab in the reverse order of removal.
Tighten bolt (7) to a torque of 10 2 N m (89 18 lb in).