8N1366 GEAR-DRIVE Caterpillar parts
D379
Rating:
Alternative (cross code) number:
CA8N1366
8N-1366
8N1366
CA8N1366
8N-1366
8N1366
Weight: 7 pounds 3 kg.
INDUSTRIAL ENGINE,
Compatible equipment models: 8N1366:
Number on catalog scheme:
19
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-9906 Ratchet Puller 1
B 138-7574 Link Bracket 1
C 138-7575 Link Bracket 3
Illustration 1 g00855504
Attach Tooling (C) to final drive (10), as shown.
Attach a suitable hoist and lifting chains to Tooling (C) .
Use the hoist in order to install final drive (10) to wheel brake assembly (12). The weight of final drive (10) is 749 kg (1650 lb). The weight of wheel brake assembly (12) is 204 kg (450 lb).
Install four bolts (11) and the washers to wheel brake assembly (12) .
Remove Tooling (C) from final drive (10) .
Install three bolts (8) to retainer (9) .
Illustration 2 g00855502
Install a new O-ring seal (7) in the final drive and wheel brake assembly.
Illustration 3 g00855500
Attach Tooling (A) and Tooling (B) to the final drive, and wheel brake assembly, as shown.
Attach a suitable hoist and lifting chains to Tooling (B) .
Use the hoist in order to install final drive and wheel brake assembly (6). The weight of final drive and wheel brake assembly (6) is 953 kg (2100 lb).
Install 34 bolts (5) and the washers. Tighten bolts (5) to a torque of 1150 150 N m (850 110 lb ft).
Illustration 4 g00855498
Install brake line (4), bolt (3), the washer, and the clip.
Illustration 5 g00855497
Install two guards (2) and four bolts (1) .End By:
Install the tire and the rim. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install" or refer to Disassembly and Assembly, "Tire and Rim (Rear) - Remove and Install" for the machine that is being serviced.
Install the final drive planetary carriers. Refer to Disassembly and Assembly, "Final Drive Planetary Carrier - Install" for the machine that is being serviced.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-9906 Ratchet Puller 1
B 138-7574 Link Bracket 1
C 138-7575 Link Bracket 3
Illustration 1 g00855504
Attach Tooling (C) to final drive (10), as shown.
Attach a suitable hoist and lifting chains to Tooling (C) .
Use the hoist in order to install final drive (10) to wheel brake assembly (12). The weight of final drive (10) is 749 kg (1650 lb). The weight of wheel brake assembly (12) is 204 kg (450 lb).
Install four bolts (11) and the washers to wheel brake assembly (12) .
Remove Tooling (C) from final drive (10) .
Install three bolts (8) to retainer (9) .
Illustration 2 g00855502
Install a new O-ring seal (7) in the final drive and wheel brake assembly.
Illustration 3 g00855500
Attach Tooling (A) and Tooling (B) to the final drive, and wheel brake assembly, as shown.
Attach a suitable hoist and lifting chains to Tooling (B) .
Use the hoist in order to install final drive and wheel brake assembly (6). The weight of final drive and wheel brake assembly (6) is 953 kg (2100 lb).
Install 34 bolts (5) and the washers. Tighten bolts (5) to a torque of 1150 150 N m (850 110 lb ft).
Illustration 4 g00855498
Install brake line (4), bolt (3), the washer, and the clip.
Illustration 5 g00855497
Install two guards (2) and four bolts (1) .End By:
Install the tire and the rim. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install" or refer to Disassembly and Assembly, "Tire and Rim (Rear) - Remove and Install" for the machine that is being serviced.
Install the final drive planetary carriers. Refer to Disassembly and Assembly, "Final Drive Planetary Carrier - Install" for the machine that is being serviced.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
G342C
3406, 621, 621B
6N3599
GEAR ASSEM.
3406, 621, 621B
3406, 621, 621B
7N6343
GEAR ASSEM.
3512, 785
3512, 785
1L5361
GEAR (40T.)
D343
D343
7W5005
GEAR AS
G398
G398
