8S1064 GEAR AND PINION (38 & 10 Teeth) Caterpillar parts
977K, D6C
Rating:
Alternative (cross code) number:
CA8S1064
8S-1064
8S1064
CA8S1064
8S-1064
8S1064
Weight: 1 pounds 0 kg.
TRACK LOADER, TRACK-TYPE TRACTOR,
Number on catalog scheme:
14
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g03414941
Remove bolts (1).
Illustration 2 g03414950
Disconnect tubes (1) and remove bolts (4).
Attach a suitable lifting device to engine oil pump (3). The weight of engine oil pump (3) is approximately 42 kg (93 lb).
Remove bolts (2) and engine oil pump (3). Installation Procedure
Install engine oil pump (3) in the reverse order of removal.
Start By:
Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g03414941
Remove bolts (1).
Illustration 2 g03414950
Disconnect tubes (1) and remove bolts (4).
Attach a suitable lifting device to engine oil pump (3). The weight of engine oil pump (3) is approximately 42 kg (93 lb).
Remove bolts (2) and engine oil pump (3). Installation Procedure
Install engine oil pump (3) in the reverse order of removal.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
D6C, D6D
D6C, D6D
D6C, D6D
D6C, D6D
D6C, D6D
D6C, D6D
D6C, D6D
D6C, D8H
14E, 572G, 977K, 980, 980B, D6C, D6D, D7G
977K, 977L, D6C, D6D
12E, 561B, 955K, D4D
941, 951B, D4D, D8K
621, 941, 951B, D4D
518, 518C, 528, 528B, 530B, 920, 930, 941, 951B, D4D
D8H, D8K, D9H
6B6705
GEAR (30 Teeth)
769, D8H, D9E, D9G
769, D8H, D9E, D9G
14E, 977K, D6C, D6D, D7G
14E, 627, 627B, 637B, 977K, 988B, D6C, D6D, D7G