GEAR (112 T.) 9H4035 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Fuel System - Fill
Fuel Tank - Drain
Daily
Fuel System - Inspect
Methane Gas Detector System - Check
Every 500 Service Hours or 3 Months
Methane Gas Detector - Test
Every 1000 Service Hours or 6 Months
Fuel System Filter - Replace
Fuel Tank Strainer - Clean
Every 946 350 L (250 000 US gal)of Fuel or 9000 Service Hours
Engine Components - Rebuild/Install Reman
Every 1 892 700 L (500 000 US gal) of Fuel or 18 000 Service Hours
Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New