GEAR SET-BEVEL 9R6966 - Caterpillar

Illustration 1 g01807574
Engine Serial Number
The engine serial number plate (1) is located on the bottom right rear of the cylinder block.
Illustration 2 g01211121
Engine Serial Number ____________________Drawworks Serial Number
The DSN (2) is located on the vertical wall of the winch frame near the bottom drum. Do not operate or service the winch unless you first read the "Operation and Maintenance Manual" in conjunction with understanding the instructions for the safe operation of the winch.
Illustration 3 g01211046
Rear view
Illustration 4 g01323812
Drawworks Serial Number____________________Model ____________________Service Information Number
The SIN (3) is located on the front of the left hand console.
Illustration 5 g01211054
Service Information Number Plate (SIN) ____________________Machine PIN
The plate for Machine PIN (4) is located on the rear of the machine on the left hand rear of the case.
Illustration 6 g01188096
Machine PIN ____________________Transmission Serial Number
The transmission serial number (4) is located at the rear of the machine on the transmission cover.
Illustration 7 g01188054
Transmission Serial Number ____________________European Union
This plate is positioned on the bottom left side of the Product Identification Number (PIN).For machines compliant to "2006/42/EC", the following information is stamped onto the "CE" plate.
Illustration 8 g01883459
For a quick reference, record this information in the spaces provided below.
Engine Power primary engine (kW)____________________
Engine Power for additional engine if equipped (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year of construction____________________
Machine Type____________________For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate.
Illustration 9 g01062968
For quick reference, record this information in the spaces provided below.
Engine Power primary engine (kW)____________________
Typical machine operation weight for European market (kg)____________________
Year____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Certifications
ROPS
Illustration 10 g01323621
Illustration 11 g01323649
This film is located on the ROPS above the operator station or the cab.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.