GEAR AS-OIL PUMP 9U9329 - Caterpillar

Illustration 1 g02427542
(1) 105-7366 Bushing Bore diameter of the bushing before assembly ... 70.23 0.02 mm (2.765 0.001 inch) Installation depth of the bushing ... 10.0 0.5 mm (0.40 0.02 inch) (A) Bore of the cylinder assembly ... 109.05 0.25 mm (4.293 0.010 inch) (B) Diameter of the rod ... 79.93 0.03 mm (3.147 0.001 inch) (2) Torque for eight bolts ... 520 70 N m (384 52 lb ft) (C) Bore of the head over two lands ... 80.63 0.03 mm (3.174 0.001 inch) (3) 109-5335 Bushing Bore diameter of the bushing before assembly ... 70.23 0.02 mm (2.765 0.001 inch) Installation depth of the bushing ... 7.5 0.3 mm (0.30 0.01 inch)Note: Lubricate the face and the threads of the special locknut (4) with 309-6932 Hydraulic Oil all around before assembly. (4) Torque for the special locknut ... 4500 230 N m (3319 170 lb ft) (5) Lubricate the inside diameter and the outside diameter of three rings with clean grease. (6) Lubricate the inside diameter and the outside diameter of the seal assembly with clean grease. (7) Bore diameter of 114-0755 Bushing before assembly ... 80.183 0.017 mm (3.1568 0.0007 inch) (8) Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed. (9) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. (10) Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. (11) Before assembly, apply green Loctite 609 to the wiper seal groove.