GEAR 9W7761 - Caterpillar

Removal Procedure
Note: Put identification marks on all lines, hoses, wires, and tubes for installation purposes.
Illustration 1 g00744287
Remove six bolts (1). Remove grill (2) .
Move the battery disconnect switch to the OFF. Disconnect both battery terminals.
Illustration 2 g00636932
Raise cover (4) on wiper arm (3) .
Remove nut (5) from shaft (7) .
Remove hose (6) from wiper arm (3) .
Remove wiper arm (3) from shaft (7) .
Illustration 3 g00636285
Remove cover (8) from shaft (7) .
Illustration 4 g00636295
Remove nut (9) from shaft (7) .
Illustration 5 g00636300
Remove two screws (10). Remove filter (11) .
Illustration 6 g00636310
Remove four torx screws (12) from cover (13) .
Illustration 7 g00636312
Remove one Torx screw (14) from the right side of cover (13) .
Illustration 8 g00636319
Remove two Torx screws (15) from the left side of cover (13) .
Remove cover (13) .
Illustration 9 g00636484
Disconnect electrical connector (16) from wiper motor assembly (17) .
Illustration 10 g00636351
Remove two bolts (18). Remove wiper motor assembly (17) .
Illustration 11 g00636494
Loosen bolt (19) on arm (20). Remove arm (20) from the shaft of window wiper motor (21) .
Illustration 12 g00636501
Remove three bolts (22). Remove window wiper motor (21) from wiper motor assembly (17) .