GEAR 9W7764 - Caterpillar

Illustration 1 g00325303
Elevator Control - The elevator control (lever) is located at the right of the operator's seat. Unload (1) - Push the elevator away from the operator for the UNLOAD position. A detent will be felt. The elevator will run in this direction until the lever is moved to an other position.Stop (2) - In the STOP position, the elevator will not move. The elevator will remain in the STOP position until the lever is moved to an other position.Slow Speed Load (3) - Pull the lever toward the operator for the SLOW SPEED position. A detent will be felt. The elevator will run in the slow speed until the lever is moved to an other position.High Speed Load (4) - Move the lever further toward the operator for the HIGH SPEED LOAD position. A detent will be felt. The elevator will run in the high speed until the lever is moved to an other position.Note: Most loading is done in the HIGH SPEED LOAD position.Note: The elevator needs not to be running when you are unloading fine material.Note: Under most conditions, you do not need to run the elevator in the UNLOAD position. Material with a high percentage of green plants may be a condition for unloading in the UNLOAD position. Running the elevator in the UNLOAD position may cause faster wear of the elevator. The SLOW SPEED LOAD position will work well for most unloading.