GENERAL AR-GENSET 2045509 - Caterpillar

Illustration 19 g02538476
Location (FF) With High Speed Oil Routing Version 2, 3 (5) 363-7497 P-Clip (8) 363-7502 P-Clip (9) 215-1368 Hose As (If a machine is equipped with a 205-8586 Fuel Heater Gp , a 215-1368 Hose As will not be used. A 243-1956 Hose As should be used.) (10) 215-1369 Hose As (11) 215-1370 Hose As (12) 215-1371 Hose As
From Step 3 determine which version is applicable to the machine that is being worked on. If routing version 1 was originally installed on the machine, install upper p-clip (7) at location (FF). Make sure that hose assembly (11) is closer to the bolt. Then install lower p-clip (5) at location (FF). Make sure that hose assembly (10) is closer to the bolt. Then install p-clip (8) at location (FF). Make sure that hose assembly (9) is closer to the bolt. Then install p-clip (5) at location (FF). Make sure that hose assembly (10) is closer to the bolt. See Illustration 17.If routing version 2 or 3 with or without high speed oil are originally installed on the machine, install p-clip (8) at location (FF). Make sure that hose assembly (9) is closer to the stud. Then install p-clip (5). Make sure that hose assembly (10) is closer to the stud. See Illustration 18 or 19.
Illustration 20 g02537979
Location (GG) Routing Version 1 (7) 363-7500 P-Clip (9) 215-1368 Hose As (If a machine is equipped with a 205-8586 Fuel Heater Gp , a 215-1368 Hose As will not be used. A 243-1956 Hose As should be used.) (10) 215-1369 Hose As
Illustration 21 g02538701
Location (GG) Routing Version 2 and 3 (E) 1S-0996 P-Clip (F) 1S-6420 P-Clip (9) 215-1368 Hose As ( If a machine is equipped with a 205-8586 Fuel Heater Gp , a 215-1368 Hose As will not be used. A 243-1956 Hose As should be used.) (10) 215-1369 Hose As
From Step 3 determine which version is applicable to the machine that is being worked on. If routing version 1 was originally installed on the machine, install p-clip (7) at location (GG). Make sure that hose assembly (10) is closer to the bolt. See Illustration 20.If routing version 2 or 3 are originally installed on the machine, reinstall p-clips (E) and (F) at location (GG). See Illustration 21.How to Identify P-Clips
Illustration 22 g02539979
363-7497 P-Clip Dimensions (AAA) 17.1 mm (0.67 inch) Diameter (BBB) 19.5 mm (0.77 inch) Diameter
Illustration 23 g02540263
363-7500 P-Clip Dimensions (AAA) 19.5 mm (0.77 inch) Diameter (BBB) 23.5 mm (0.93 inch) Diameter
Illustration 24 g02540385
363-7498 P-Clip Dimensions (AAA) 19.5 mm (0.77 inch) Diameter (BBB) 17.1 mm (0.67 inch) Diameter
Illustration 25 g02540389
363-7502 P-Clip Dimensions (AAA) 23.5 mm (0.93 inch) Diameter (BBB) 19.5 mm (0.77 inch) Diameter