GENERAL AR-GENSET 2332996 - Caterpillar

Hydraulic Shear Pedal
With certain attachment combinations, the third pedal can have different functions. Always check for third pedal function before using the third pedal. Improper operation of the third pedal could result in serious injury or death.
Illustration 1 g00356452
Hydraulic shear CLOSE (1) - Push down on the front of the pedal in order to close the hydraulic shear.
Hydraulic shear OPEN (2) - Push down on the rear of the pedal in order to open the hydraulic shear.
Illustration 2 g00364454
(3) Lock pin (A) LOCKED position (B) UNLOCKED positionIn order to use the hydraulic shear pedal, remove lock pin (3) from LOCKED position (A) and place lock pin (3) in UNLOCKED position (B) .When you are not using the hydraulic shear, put the lock pin (3) in LOCKED position (A). This will lock the pedal in order to prevent any unexpected operation of the hydraulic shear.
Illustration 3 g00106787
(3) Lock pin (4) Pin (5) NotchNote: To prevent lock pin (3) from being accidentally pulled out, insert pin (4) through notch (5) and turn lock pin (3) by 90 degrees.