2361125 GENERAL AR Caterpillar parts
814F II
Rating:
Alternative (cross code) number:
CA2361125
236-1125
2361125
CA2361125
236-1125
2361125
WHEEL DOZER,
Compatible equipment models: 2361125:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 447-0910 Electric Hydraulic Pump Gp (115V) 1
447-0911 Electric Hydraulic Pump Gp (230V) 1
316-1496 Hydraulic Cylinder Gp 1
FT-3039 Receiving Sleeve 1
FT-3038 Puller Plate 1
5P-4776 Puller Stud 1
9U-6833 Nut 1
B 1P-0510 Driver Gp 1
C 452-6006 Grease Cartridge 1 Start By:
Remove the bucket.
Release the hydraulic system pressure.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Illustration 1 g01232760
Position stick (1) onto suitable cribbing.
Illustration 2 g01232761
Remove nut (2) and bolt (3). Remove pin (4). Remove any shims that may be present.
Illustration 3 g01232765
Remove nuts (7) and bolt (5). Remove right side link (6). Remove any shims that may be present.
Illustration 4 g01232767
Remove pin (9). Remove link and bearing assembly (10). Remove left side link (8).
Illustration 5 g01232794
Use Tooling (A) to remove bearings (11) and (12) from link and bearing assembly (10). Installation Procedure
Install the bucket linkage in the reverse order of removal.
Lubricate all bores with Tooling (C).
Lower the temperature of bearings (11) and (12). Use Tooling (B) in order to install bearings (11) and (12).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 447-0910 Electric Hydraulic Pump Gp (115V) 1
447-0911 Electric Hydraulic Pump Gp (230V) 1
316-1496 Hydraulic Cylinder Gp 1
FT-3039 Receiving Sleeve 1
FT-3038 Puller Plate 1
5P-4776 Puller Stud 1
9U-6833 Nut 1
B 1P-0510 Driver Gp 1
C 452-6006 Grease Cartridge 1 Start By:
Remove the bucket.
Release the hydraulic system pressure.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Illustration 1 g01232760
Position stick (1) onto suitable cribbing.
Illustration 2 g01232761
Remove nut (2) and bolt (3). Remove pin (4). Remove any shims that may be present.
Illustration 3 g01232765
Remove nuts (7) and bolt (5). Remove right side link (6). Remove any shims that may be present.
Illustration 4 g01232767
Remove pin (9). Remove link and bearing assembly (10). Remove left side link (8).
Illustration 5 g01232794
Use Tooling (A) to remove bearings (11) and (12) from link and bearing assembly (10). Installation Procedure
Install the bucket linkage in the reverse order of removal.
Lubricate all bores with Tooling (C).
Lower the temperature of bearings (11) and (12). Use Tooling (B) in order to install bearings (11) and (12).
Caterpillar SIS machinery equipment:
Parts general Caterpillar catalog:
2632538
GENERAL AR
3406C
3406C
2455643
GENERAL AR
345C
345C
2455642
GENERAL AR
345C
345C
2202458
GENERAL AR
345C
345C
2202459
GENERAL AR
345C
345C
2516364
GENERAL AR
IT62H
IT62H
2361126
GENERAL AR
815F II
815F II