GENERAL AR 3006306 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0510     Driver Group     1    
Illustration 1 g00883157
Install orifice plugs (12) in valve body (1) .
Illustration 2 g00883156
Install retainer (9), spring (10), and retainer (11) on valve stem (8) .
Illustration 3 g00883210
Install valve stem (8) in valve body (1), as shown.
Illustration 4 g00883211
Install the O-ring seal and housing (7) on valve body (1) .
Illustration 5 g00883154
Use Tooling group (A) in order to install seal (6) in housing (4) .Note: The lip of the seal must be toward the inside of the valve.
Install O-ring seal (5) in housing (4) .
Illustration 6 g00883153
Install O-ring seals (2) and O-ring seals (3) in valve body (1) .
Install housing (4) on valve body (1) .End By: Install the pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Tilt) - Install" for the machine that is being serviced.