GENERATOR AR 1441820 - Caterpillar

Illustration 1 g01395757
Section view of the camshaft sleeve bearingsDepth for the installation of the camshaft sleeve bearings (A) ... 0.5 0.5 mm (0.02 0.02 inch) (B) ... 154.0 0.5 mm (6.06 0.02 inch) (C) ... 303.2 0.5 mm (11.94 0.02 inch) (D) ... 601.7 0.5 mm (23.69 0.02 inch) (E) ... 903.4 0.5 mm (35.57 0.02 inch)Note: The sleeve bearing at the front of the block must be installed with the oil holes in a horizontal position. The sleeve bearing joint at the top must be within 15 degrees from vertical.