GENERATOR GP -E 20R5643 - Caterpillar

When Required
Engine Air Intake System - Clean, replace elements Ether Starting Aid - Replace cylinder Fuses and Circuit Breakers - Replace fuses, reset breakers Fuel System - Service when loss of power occurs Cutting Edges and End Bits - Replace if worn or damaged Ripper Tips - Replace if worn or damaged Radiator - Clean or replace pressure cap, clean core Windshield Wipers and Washer - Inspect wiper blades, fill washer reservoir Winch (If Equipped) - Install wire rope cableEvery 10 Service Hours or Daily
Walk-Around Inspection - Inspect machine Engine Crankcase - Check oil level Transmission - Check oil level Hydraulic Tank - Check oil level Radiator - Check coolant level Fuel Tank - Drain water and sediment Seat Belt - Inspect for wear or damage Indicators and Gauges - Test, inspect Winch (If Equipped) - Check oil level Back-up Alarm - TestEvery 50 Service Hours or Weekly*
Bevel Gear Compartment - Check oil level Track Pins - Inspect Cab Air System - Clean filters Ripper Linkage and Cylinder Bearings -LubricateEvery 250 Service Hours or Monthly*
Engine Crankcase - Change oil and filter. If sulfur content in the fuel is more than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Cooling System - Add coolant additive Final Drives - Check oil level Transmission 3F/1R - Clean screen Oil Cooled Steering Brake/Clutch (If Equipped) -Check oil level Brakes - Test Tracks - Adjust Fan and Alternator Belt - Inspect, adjust, replace Batteries - Check electrolyte level Engine Valve Lash - Adjust on new, rebuilt or reconditioned engines at first oil change, then at normal interval thereafterEvery 500 Service Hours or 3 Months*
Transmission 3F/3R - Change filter Hydraulic System - Change filter Universal Joints - Lubricate Power Take-Off (If Equipped) - Lubricate Power Take-Off Bearing (If Equipped) - Lubricate Fuel System - Change filter Fuel Tank - Clean cap and fill screen Winch Filter and Magnetic Strainer (If Equipped)Change element, wash strainerEvery 1000 Service Hours or 6 Months*
Engine Crankcase Breather - Clean Transmission - Change oil, wash breather Final Drives - Change oil Winch (If Equipped) - Change oil, wash breather Rollover Protective Structure (ROPS) - Inspect Hydraulic Tank - Change oil Engine Valve Lash - Adjust Bevel Gear Compartment - Change oil and breather Oil Cooled Steering Brake/Clutch (If Equipped) -Change oil PCV Valve (If Equipped) - Replace diaphragmsEvery 3000 Service Hours or 2 Years*
Cooling System - Change coolant, clean system*First Perform Previous Service Hours Items