AVSPARE.COM
parts catalog

GENERATOR AR-HYDRAULIC 2389784 - Caterpillar



2389784 GENERATOR AR-HYDRAULIC Caterpillar parts 345B II GENERATOR
Rating:
21
Alternative (cross code) number:
CA2389784
238-9784
2389784
Caterpillar 2389784 GENERATOR AR-HYDRAULIC

Buy GENERATOR AR-HYDRAULIC 2389784 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2389784:

EXCAVATOR  345B II   Caterpillar
  For full view, you need register

Information:


Remove plug (29) and seal (30) from pressure and flow compensator valve (2).
Remove plug (23) from pressure and flow compensator valve (2). Remove O-ring seal (22) from the plug.
Remove cap nut (28), seal (27), adjustment nut (25), seal (24) and adjustment screw (26) from plug (23).
Remove seat (35), spring (34), spring (33), spring retainer (32) and valve stem (31) from pressure and flow compensator valve (2).
Illustration 5 g00856683
Remove piston guide (36) and plunger guide (39) from break off plug (6).
Remove pin (37) from break off plug (6).
Remove bearing cup (38) from break off plug (6).
Illustration 6 g00856715
Typical example
Remove O-ring seal (44) from pump housing (1).
Remove spring (42) and control piston (41) from the swashplate assembly.
Remove port plate (43) from the barrel.
Remove bearing cone (40) from the pump shaft.
Illustration 7 g00856716
Typical example
Remove spacer (46), barrel (45), and plunger (47) from pump housing (1).
Illustration 8 g00856719
Remove bearing (51), retainer plate (48) and nine piston assemblies (49) from swashplate assembly (50).
Illustration 9 g00856756
Remove swashplate assembly (50) from pump housing (1).
Illustration 10 g00856759
Remove pump shaft (52) and bearing cone (53) from pump housing (1). Remove bearing cone (53) from the pump shaft.
Illustration 11 g00856760
Remove O-ring seal (55) from pump housing (1).
Use Tooling (A) in order to remove retaining ring (54) from pump housing (1).
Illustration 12 g01199726
Remove bearings (56) from pump housing (1).
Remove lip seal (58) from pump housing (1).
Remove bearing cup (57) from pump housing (1).
Illustration 13 g01199729
Remove plug (60) and O-ring seal (59) from pump housing (1).
Illustration 14 g00857207
Remove pin (61) from barrel (45).
Illustration 15 g00857210
Illustration 16 g00857211
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Position barrel (45) in a suitable press, as shown. Use Tooling (C) and the suitable press in order to compress spring (63).
Use Tooling (B) to remove retaining ring (62). Remove spring (63) and spring seat (64) from barrel (45).

Caterpillar SIS machinery equipment:

Caterpillar SIS
  • 345B Factory Installed Right Front Corner Generator Set (238-9784 Generator Arrangement) AGS00001-UP (MACHINE) POWERED BY 3176 Engine » 238-9784 GENERATOR AR-HYDRAULIC


Parts generator Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.