3010473 GENERATOR GP Caterpillar parts
C32
Rating:
Alternative (cross code) number:
CA3010473
301-0473
3010473
CA3010473
301-0473
3010473
GENERATOR SET,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
D'COR SEAT COVER, BLACK, BLACK RIBS CRF250/450 30-10-473
D'Cor Visuals Specifically designed for the demands of motocross || Made from 10mm UV coated toughtek material || Sewn together using dura strength nylon thread and ballistic nylon bias for all seams || Patterns are created with factory teams to ensure a quality fit
D'Cor Visuals Specifically designed for the demands of motocross || Made from 10mm UV coated toughtek material || Sewn together using dura strength nylon thread and ballistic nylon bias for all seams || Patterns are created with factory teams to ensure a quality fit
For full view, you need register
Compatible equipment models: 3010473:
Caterpillar SIS machinery equipment:
Caterpillar SIS
C32 Generator Set FLX00001-UP »
301-0473
GENERATOR GP
C27 Generator Set 2A300001-UP »
301-0473
GENERATOR GP
C32 Generator Set JTW00001-UP »
301-0473
GENERATOR GP
C32 Generator Set PAE00001-UP »
301-0473
GENERATOR GP
C32 Generator Set P7E00001-UP »
301-0473
GENERATOR GP
C32 Generator Set for LRC NRC00001-UP »
301-0473
GENERATOR GP
C32 Generator Set for LRC NRC00001-UP »
301-0473
GENERATOR GP
C32 Generator SET JSJ00001-UP »
301-0473
GENERATOR GP
C32 Marine Generator SET RNF00001-UP »
301-0473
GENERATOR GP
C32 Generator Set JAZ00001-UP »
301-0473
GENERATOR GP
C32 Generator Set JAZ00001-UP »
301-0473
GENERATOR GP
Caterpillar parts catalog:
Information:
The drawing for the FT1523 Fuel Oil System With External Filter is available from your Division Service Manager.
Procedure To Install FT1523 Fuel Oil System With External Filter
1. Assemble items 1 through 16 in the parts chart as shown in Illustration 1.
Illustration 1. Location of parts for assembly of external filter and base.
Illustration 2. General location of holes which must be drilled for filter base and hoses.2. Hold the filter base in the same position shown in Illustration 1 to find the general location of the holes to be made in the panel. See Illustration. Selection of the location is important. If the filter base is too high on the panel, the fuel drain pan on the inside of the bench will prevent installation of the fuel lines. Also, if the fuel injection bench is equipped with a fuel shut-off valve, the filter and base must be high enough on the panel to permit removal of the filter. Drill the four holes to the dimensions given in Illustration 3.
Illustration 3. Dimensions for size and location of holes.3. Fasten the base and filter, assembled in Step 1, to the panel with the two S1588 Bolts, four 5M2894 Washers (one on each side of the panel) and two 1D4717 Nuts.4. Connect the two 9L6958 Hoses to the fittings on the filter base.5. Disconnect the fuel supply hose from the junction block shown in Illustration 4. Use the 7K4129 Union to connect the fuel supply hose and the filter inlet hose. On fuel injection test benches equipped with a fuel shut-off valve, the 7K4129 is not needed. Connect the fuel filter so the oil goes through the valve and then through the filter.Connect the filter outlet hose to the fitting on the bottom of the junction block.
Illustration 4. Installation of filter inlet and outlet lines in fuel supply circuit.6. Assemble items 19 through 22 as shown in Illustration 5. Install this assembly in place of the filter element in the fuel supply tank. Bend the metal bracket so the strainer can not make contact with the fuel heater element.7. Carefully test the operation of the fuel injection test bench and add oil if and when necessary.
Illustration 5. Location of parts for installation of strainer.
Procedure To Install FT1523 Fuel Oil System With External Filter
1. Assemble items 1 through 16 in the parts chart as shown in Illustration 1.
Illustration 1. Location of parts for assembly of external filter and base.
Illustration 2. General location of holes which must be drilled for filter base and hoses.2. Hold the filter base in the same position shown in Illustration 1 to find the general location of the holes to be made in the panel. See Illustration. Selection of the location is important. If the filter base is too high on the panel, the fuel drain pan on the inside of the bench will prevent installation of the fuel lines. Also, if the fuel injection bench is equipped with a fuel shut-off valve, the filter and base must be high enough on the panel to permit removal of the filter. Drill the four holes to the dimensions given in Illustration 3.
Illustration 3. Dimensions for size and location of holes.3. Fasten the base and filter, assembled in Step 1, to the panel with the two S1588 Bolts, four 5M2894 Washers (one on each side of the panel) and two 1D4717 Nuts.4. Connect the two 9L6958 Hoses to the fittings on the filter base.5. Disconnect the fuel supply hose from the junction block shown in Illustration 4. Use the 7K4129 Union to connect the fuel supply hose and the filter inlet hose. On fuel injection test benches equipped with a fuel shut-off valve, the 7K4129 is not needed. Connect the fuel filter so the oil goes through the valve and then through the filter.Connect the filter outlet hose to the fitting on the bottom of the junction block.
Illustration 4. Installation of filter inlet and outlet lines in fuel supply circuit.6. Assemble items 19 through 22 as shown in Illustration 5. Install this assembly in place of the filter element in the fuel supply tank. Bend the metal bracket so the strainer can not make contact with the fuel heater element.7. Carefully test the operation of the fuel injection test bench and add oil if and when necessary.
Illustration 5. Location of parts for installation of strainer.
Parts generator Caterpillar catalog:
2L9398
GENERATOR GROUP
D353C
D353C
3285417
GENERATOR GP
3512, 3512B, 3512C, 3516, SR4B
3512, 3512B, 3512C, 3516, SR4B
6I4829
GENERATOR GP
3512, 3516, G3516, SR4
3512, 3516, G3516, SR4
8L0015
GENERATOR
D399, G399
D399, G399
3111139
GENERATOR GP
3512C, 3516, 3516B, 3516C
3512C, 3516, 3516B, 3516C
6I3094
GENERATOR GP
3508, 3512, G3516, SR4
3508, 3512, G3516, SR4
1586431
GENERATOR GP
3516, 3516B, G3520C, G3520E, SR4B
3516, 3516B, G3520C, G3520E, SR4B
3382074
GENERATOR AR
3406C, 3456, C13, C15, C15 I6, C18, C18 I6, C9
3406C, 3456, C13, C15, C15 I6, C18, C18 I6, C9