GENERATOR AR 3420544 - Caterpillar

Illustration 3 g02118437
EMCP 4.4 Control System Panel
(1) Display screen
(2) F4 Soft key
(3) F3 Soft key
(4) F2 Soft key
(5) F1 Soft key
(6) Control key
(7) AC overview key
(8) Engine overview key
(9) Main menu key
(10) Warning indicator lamp (yellow)
(11) Alarms acknowledge key and silence key
(12) Shutdown indicator lamp (red)
(13) Event reset key
(14) Event log key
(15) Run key
(16) Auto key
(17) Stop key
(18) Escape key
(19) Up key
(20) Right key
(21) OK/Enter key
(22) Down key
(23) Left keySoft Keys
F4 Soft Key (2) - The function of the "F4" soft key can change depending on which screen is active. The space at the bottom of the screen immediately above each soft key displays what the function of that soft key will be.F3 Soft Key (3) - The function of the "F3" soft key can change depending on which screen is active. The space at the bottom of the screen immediately above each soft key displays what the function of that soft key will be.F2 Soft Key (4) - The function of the "F2" soft key can change depending on which screen is active. The space at the bottom of the screen immediately above each soft key displays what the function of that soft key will be.F1 Soft Key (5) - The function of the "F1" soft key can change depending on which screen is active. The space at the bottom of the screen immediately above each soft key displays what the function of that soft key will be.Navigation Keys
Control Key (6) - The "CONTROL" key will navigate the display to the control menu.AC Overview Key (7) - The "AC OVERVIEW" key will navigate the display to the first screen of AC information. The "AC OVERVIEW" information contains various AC parameters that summarize the electrical operation of the generator set.Engine Overview Key (8) - The "ENGINE OVERVIEW" key will navigate the display to the first screen of engine information. The "ENGINE OVERVIEW" information contains various engine parameters that summarize the operation of the generator set.Main Menu Key (9) - The "MAIN MENU" key will navigate the display to the main menu directly without having to navigate out of menus.Acknowledge Key (11) - Pressing the "ACKNOWLEDGE" key will cause the horn relay to turn off. The horn relay being turned off will silence the horn. Pressing the "ACKNOWLEDGE" key will also cause any red or yellow flashing lights to either turn off or to come on continuously. The "ACKNOWLEDGE" key will also send out a global alarm silence signal on the J1939 Data Link. Annunciators on the J1939 Data Link can be configured to silence their individual horns upon receipt of the global acknowledge.Reset Key (13) - Pressing the "RESET" key will reset all events that can be reset at this time. (Events that are PRESENT cannot be reset).Event Log Key (14) - Pressing the "EVENT LOG" key will navigate the display to the event log.RUN Key (15) - Pressing the "RUN" key will put the generator set into a mode where it will attempt to start the engine, except