GENERATOR G. 4M6954 - Caterpillar

Illustration 8 g01153117
Remove screw (12) and duct (13). Duct (13) is located below duct (11). Refer to illustration 7.
Illustration 9 g01153118
Remove bolts (14) in order to remove air distribution assembly (15). Remove support assembly (16) .
Illustration 10 g01153119
Remove air filter (17) .
Illustration 11 g01153120
Disconnect harness assembly (18). Remove cab temperature sensor (19) from cable straps (20). Remove temperature sensor (19) .Installation Procedure
Illustration 12 g01153120
Install temperature sensor (19) and cable straps (20). Connect harness assembly (18) .
Illustration 13 g01153119
Install air filter (17) .
Illustration 14 g01153118
Install support assembly (16). Install air distribution assembly (15). Install bolts (14) .
Illustration 15 g01153117
Install duct (13) and screw (12) .
Illustration 16 g01153116
Install duct (11) and screws (10) .
Illustration 17 g01153115
Install vents (9) .
Illustration 18 g01153114
Install harness assembly (8) and plate (7). Install duct (6) .
Illustration 19 g01153112
Connect harness assemblies (5) .
Illustration 20 g01153111
Install cover (4) .
Illustration 21 g01153110
Install bolts (3) .
Illustration 22 g01153109
Position floor mat (2) in the rear position and install plate (1) .End By: Install the seat support. Refer to Disassembly and Assembly, "Seat Support - Remove and Install".