GENERATOR GP 5533945 - Caterpillar

Make sure all the hydraulic pressure is released from the system before any hydraulic lines or hoses are disconnected.
Start By:a. Remove cab.1. Drain hydraulic oil from hydraulic tank into suitable container. 2. From underneath the machine, disconnect the oil filler hose (1) and pump suction hose (2) from the tank. Cap off to prevent oil spillage. 3. Disconnect hydraulic oil filter return pipe (3) and two hydraulic hoses (4) and (5) from hydraulic tank manifold. Cap off to prevent oil spillage. 4. Remove one bolt (6), two nuts (7), bolts (8) and washers (9) from hydraulic tank mounting brackets. 5. Attach two slings and, using suitable lifting equipment, remove the hydraulic tank from the machine. Weight of hydraulic tank is approximately 53Kg (116 lbs).Install Hydraulic Tank.
1. Assemble the hydraulic tank into the chassis and install one bolt (6) and two nuts (7), bolts (8) and washers (9) to the hydraulic tank mounting brackets. 2. Connect hydraulic oil filter return pipe (3) and two hydraulic hoses (4) and (5) to hydraulic tank manifold. 3. Connect pump suction hose (2) and oil filler hose (1) to the hydraulic tank.End By:a. Install cab.