GENERATOR GP-E 5607773 - Caterpillar

Illustration 1 g00519922
(A) Bucket teeth (B) Wear plates (W) Width of bucketNote: All bores for pins must be free of paint. Coat all bores for pins with lubricant. (1) Bore diameter for pin ... 65 mm (2.6 inch) (2) A larger bore diameter for receiving the flange of the adjuster ... 103 mm (4.1 inch)
Table 1
Bucket Assembly     Number of Teeth     Type of Bucket     Width of Bucket     SAE Capacity    
190-3325     5     X    
915 mm (36 inch)     0.5 m3    
193-4763     3     X    
610 mm (24 inch)     0.29 m3    
193-4779     4     X    
760 mm (30 inch)     .38 m3    
193-4795     5     X    
1067 mm (42 inch)     0.6 m3    
193-4811     6     X    
1218 mm (48 inch)     .71 m3