GENERATOR GP 5N0061 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
1/2 - 13 NC by 3 inch 2
Remove the belt from the engine.
Illustration 1 g01187749
Illustration 2 g01187800
Remove nuts (1) and pulley (2).
Remove two bolts (3) and install Tooling (A).
Remove remaining bolts (3).
Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately 35 kg (76 lb). Remove vibration damper (4) from the adapter. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
1/2 - 13 NC by 3 inch 2
Illustration 3 g01187800
Illustration 4 g01187749
Install Tooling (A) in the adapter.
Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately 35 kg (76 lb). Position vibration damper (4) on the adapter.
Install bolts (3). Remove Tooling (A).
Install remaining bolts (3). Tighten bolts (3) to a torque of 105 20 N m (77 15 lb ft).
Install pulley (2) and nuts (1). Tighten nuts (1) to a torque of 135 20 N m (100 15 lb ft).
Install the belt on the engine.