GENERATOR AR 5N7087 - Caterpillar

Popups
The OK button clears all popups except Level 3 warnings.Confirmation
The confirmation popup will allow the operator to confirm or cancel the selection.Brightness
When the user presses the brightness button, the button release will trigger the brightness popup. While this popup is shown, pressing the brightness button decrease the brightness level. Pressing the left or right buttons while this popup is shown will cause the brightness level to decrease or increase accordingly. If the brightness level is decreased when the brightness level is zero, the level will wrap around to 100%. If the brightness level is increased when the brightness level is 100%, the level will wrap around to zero.Info Popups
Info popups will provide non-safety critical messages to the operator. These messages will have a high level of configurability, allowing each popup to be individually customized to provide required information.Warning Popups
Level 2
A level 2 warning will supersede any active information popups. These warnings may be snoozed for a period of time, after which it will reappear if the event generating the warning is still active. An arrow will indicate when multiple warnings are active. Pressing the right and left keys will allow the operator to scroll through all active warning screens. If the user has not pressed the left or right key for 3 seconds, the display will automatically page through active level 2 warnings when there are no level 3 warnings active.Level 3
Level 3 Warnings are of the highest priority. A level 3 warning will always supersede an active level 2 warning. These warnings may not be snoozed. An arrow will indicate when multiple warnings are active. Pressing the right and left keys will allow the operator to scroll through all active warning screens. If the user has not pressed the left or right key for 3 seconds, the display will automatically page through active level 3 warnings only. Every 10 seconds the display will return to the most recent level 3 warning.Functional Test
To ensure the proper operation of the monitoring system, check the system daily.The battery disconnect switch must be in the ON position.When you turn the engine start switch key from the OFF position to the ON position, the Caterpillar monitoring system will perform an automatic self-diagnostic test.The self-diagnostic test verifies that the outputs (gauges, alert indicators, and alarms) are operating correctly.When you turn the engine start switch key to the ON position, the following systems are tested for approximately one second: Alert indicators, Gauges, and LCD displaysThe gauges must go to the far right positions. All alert indicators must come on momentarily. All segments of the LCD displays must come on momentarily. The action alarm must sound.Warning Categories
The Monitoring System provides four warning categories. The first warning category requires only operator awareness. The second warning category requires a change to machine operation or performance of maintenance to the system. The third warning category requires an immediate change of the machine operation. The fourth category