GENERATOR AR 7C1626 - Caterpillar

Removal Procedure
Note: Put identification marks on all harness assemblies for installation purposes.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Illustration 1 g01335968
Remove cover (1) .
Illustration 2 g01335970
Disconnect harness assemblies (2). Remove bolts (3). Remove condenser fan (4) and fan motor (5) .Installation Procedure
Table 1
Required Tools    
Tools     Part Number     Part Description     Qty    
A     155-0695     Thread Lock Compound     1    
Illustration 3 g01335970
Install fan motor (5) and condenser fan (4) .
Apply Tooling (A) to bolts (3). Install bolts (3). Tighten the bolts (3) to a torque of 6 3 N m (53 27 lb in).
Connect harness assemblies (2) .
Illustration 4 g01335968
Install cover (1) .