GENERATOR GP 9Y1430 - Caterpillar

Install seals (39a), (39b), and (39c) on the top edges of guard assembly (12) .
Use bolts (29), washers (32) and lock nuts (31). Tighten bolts (29) to a torque of 15 3 N m (133 27 lb in).Installing 3E-8082 Seal Along Edges of Lower Frame Assembly
Illustration 21 g03877300
View of seal installation (17) 421-0186 Cap (40a) 3E-8082 Seal 982 mm (38.7 inch) (40b) 3E-8082 Seal 982 mm (38.7 inch)
Install seals (40a) and (40b) on the top edges of lower frame assembly.
Plug holes with caps (17) .Installing 6V-6603 Seal in Cab Side Bottom
Illustration 22 g03877307
View of seal installation (36a) 6V-6603 Seal 764 mm (30.1 inch) (36b) 6V-6603 Seal 764 mm (30.1 inch)
Install seal (36a) to the cab right-hand side edge.
Install seal (36b) to the cab left-hand side edge.Note: This seal has an adhesive back to install, remove tape section and install.Installing Cab Rear Seal
Illustration 23 g03877313
View of seal installation (37) 132-8502 Seal 710 mm (28 inch) (O) Cab Plate
Install seal (37) onto the bottom edge of cab plate (O) .Installing 3E-8082 Seal On Side Panels
Illustration 24 g03877344
View of seal installation (15) 421-0184 Panel (16) 421-0185 Panel (40a) 3E-8082 Seal 359 mm (14.1 inch) (40b) 3E-8082 Seal 242 mm (9.5 inch) (40c) 3E-8082 Seal 379 mm (15 inch) (40d) 3E-8082 Seal 178 mm (7.00786 inch)
Install seals (40a) and (40b) onto panel assembly right hand (15) .
Install seals (40c) and (40d) onto panel assembly left hand (16) .Installing Side panels to Cab
Illustration 25 g03877351
View of panel installation (P) Existing hardware (15) 421-0184 Panel (16) 421-0185 Panel
Install panels (15) and (16) to cab using existing fasteners (P) .Machines With Air Conditioning Or Heaters
Illustration 26 g03877361
View of cover assembly installation (2) 385-8593 Retainer (3) 385-8594 Receptacle (18) 422-3229 Fastener (19) 441-0122 Cover As
Install cover assembly (19) on the existing side plate using receptacle (3), retainer (2), and fastener (18) .Installation of The Grommet on Radiator Fill
Illustration 27 g03877370
View of grommet (20) 444-5992 Grommet
Install grommet (20) in the radiator fill hole.