GLASS 0942119 - Caterpillar

(1) Torque for nut to hold switch ... 17 to 20 N m (13 to 15 lb. ft.)(4) Torque for four locknuts on rod assemblies ... 12 4 N m (9 3 lb. ft.)(A) Assembled length of rod assembly ... 571 2 mm (22.50 .08 in.)(C) Assembled length of rod assembly ... 845 2 mm (33.27 .08 in.)Procedure For Adjustment Of Control Linkage:
1. Adjust rod assemblies (A) and (C) to the lengths shown above. This length is measured in a straight line between the centerlines of the rod mounting holds.2. Install rod assemblies (A) and (C) and make sure spring (5) is fastened to rod assembly (A).3. Adjust setscrews (2) so they move (depress) switch (1) dimension (3) when the control lever is moved to the low speed side of the guide plate.