GLASS-SLIDING 1399138 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket. The principal intended functions are digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel. Additional work tools allow this machine to perform other specific tasks.Specified Useful Life or Expected Life
The specified useful life, defined as total years of operation, or expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machine’s specified useful life or expected life. The following items are required to obtain an economical specified useful life or expected life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.With full fluids, the maximum fore and aft continuous slope operation for proper lubrication is 30 degrees.This machine is approved for use in environments with no explosive gases.Machine Data
This machine is equipped with a C7.1 Engine. Dimensions may vary with work tools.Basic machine specifications include the following:
Michelin L3 XHA2 23.5R25 tires or equivalent
Full fuel tank
Full diesel exhaust fluid (DEF) tank
80 kg (176 lb) operator
Full fluids
Air conditioner
Ride control
General-purpose bucket with BOCE (950M Z 3.1 cubic meter (4.1 cubic yard) and 962M Z 3.3 cubic meter (4.3 cubic yard))Shipping weight includes the following:
Michelin L3 XHA2 23.5R25 tires or equivalent
10% fuel in the tank
Full diesel exhaust fluid (DEF) tank
Full fluids
Air conditioner
Ride control
General-purpose bucket with BOCE (950M Z 3.1 cubic meter (4.1 cubic yard) and 962M Z 3.3 cubic meter (4.3 cubic yard))Basic machine specifications are listed in the following tables.
Table 1
950M Z Wheel Loader
Operating Weight 18136 kg (39983 lb)
Shipping Weight 18015 kg (39716 lb)
Maximum Length 8199 mm (323 inch)
Width 2904 mm (114 inch)
Height to Top of ROPS 3457 mm (136 inch)
Table 2
962M Z Wheel Loader
Operating Weight 19123 kg (42159 lb)
Shipping Weight 19002 kg (41892 lb)
Maximum Length 8573 mm (338 inch)
Width 2904 mm (114 inch)
Height to Top of ROPS 3447 mm (136 inch)