GLASS AS 1457769 - Caterpillar

Install covers (38) and the new O-ring seals into the block. Install half flanges (37) onto the block. Install bolts (36) .
Illustration 2 g00889110
Apply Tooling (A) to the threads of guide (35) and plug (33) . Install guide (35) into the spool. Tighten guide (35) to a torque of 7 0.5 N m (63 4 lb in). Install ball (34) and plug (33) into guide (35) . Tighten plug (33) to a torque of 7 0.5 N m (63 4 lb in).
Repeat Step 2 for the other side of the spool.
Illustration 3 g00697162
Install spool (32) into the block.
Illustration 4 g00889108
Install guide (31) , spring (30) , spacer (29) , sleeve (28) , and new O-ring seal (27) into the block.
Illustration 5 g00697306
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install cover (26) onto the block. Install bolts (25) . Tighten bolts (25) to a torque of 80 8 N m (59 6 lb ft).
Repeat Step 5 through Step 6 for the remaining cover.
Illustration 6 g00697004
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Assemble the relief valves (8) .
Install seat (9) .
Install springs (12) and (17) .
Install backup rings (19) and new O-ring seal (13) into the piston.
Install piston (18) into the body.
Install backup ring (22) and new O-ring seal (21) into the stop.
Install stop (14) and screw (15) into the body.
Install nut (24) . Tighten nut (24) to a torque of 130 13 N m (96 10 lb ft).
Install backup rings (11) and new O-ring seal (10) .
Install new O-ring seal (20) onto the relief valve.
Illustration 7 g00697000
Install relief valves (8) into the block. Tighten relief valves (8) to a torque of 540 50 N m (398 37 lb ft).
Illustration 8 g00889107
Install valves (7) and springs (6) into the block.
Illustration 9 g00696975
Install new O-ring seals (4) and (5) onto the plugs.
Illustration 10 g00889106
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install plugs (1) and the new O-ring seals into counterbalance valve (3) . Tighten plugs (1) to a torque of 76 8 N m (56 6 lb ft). Install plugs (2) and the new O-ring seals into the counterbalance valve. Tighten plugs (2) to a torque of 31 3 N m (274 27 lb in).End By: Install the counterbalance valve. Refer to Disassembly and Assembly, "Counterbalance Valve (Travel) - Install".