GLASS 1875381 - Caterpillar

Conditions Which Generate This Code:
Illustration 1 g01072866
Map for plugged fuel filter (low fuel pressure)
Table 1
Trip Level     Set Point (sec)     Reset Level     Reset Time    
Refer to illustration 1 for additional information.     10 sec    
10 kPa (1 psi)     4 sec    System Response:The warning lamp will turn ON while the "Warning" is active.The Electronic Control Module (ECM) will generate a EID 095 event code on the CAT data link. The event code will be displayed on a diagnostic screen of the Caterpillar Electronic Technician (ET).The ECM will generate a SPN 094-FMI 00 event code on the J1939 data link. The event code may be displayed on a receiving device for the J1939 data link.The ECM will generate a 63 flash code that will be displayed on the diagnostic lamp.This event code indicates a restriction in the fuel filter. This does not represent a problem with the ECM.Test Step 1. Replace the plugged fuel filter.Results:
OK - STOP