1961467 GLASS Caterpillar parts
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
Rating:
Alternative (cross code) number:
CA1961467
196-1467
1961467
CA1961467
196-1467
1961467
Weight: 46 pounds 20 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Compatible equipment models: 1961467:
Number on catalog scheme:
41
For full view, you need register
Information:
Removal Procedure
Start By:
Release hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the work tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Note: The pilot relief valve is located in the oil filter base which is located on the hydraulic filters on the hydraulic tank.
Illustration 1 g01216033
Open door (1).
Illustration 2 g01216034
Remove pilot relief valve (2) from the oil filter base.
Illustration 3 g01216036
Illustration 4 g01216040Note: The individual components of the relief valve are nonserviceable. Do not disassemble the relief valve.
Remove O-ring seals (3), (4), and (5) from pilot relief valve (2). Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 5 g01216040
Illustration 6 g01216036
Install O-ring seal (5), (4), and (3) on pilot relief valve (2).
Illustration 7 g01216034
Install pilot relief valve (2) in the oil filter base. Tighten the pilot relief valve to a torque of 118 10 N m (87 7 lb ft).
Illustration 8 g01216033
Close door (1).
Start By:
Release hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the work tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Note: The pilot relief valve is located in the oil filter base which is located on the hydraulic filters on the hydraulic tank.
Illustration 1 g01216033
Open door (1).
Illustration 2 g01216034
Remove pilot relief valve (2) from the oil filter base.
Illustration 3 g01216036
Illustration 4 g01216040Note: The individual components of the relief valve are nonserviceable. Do not disassemble the relief valve.
Remove O-ring seals (3), (4), and (5) from pilot relief valve (2). Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 5 g01216040
Illustration 6 g01216036
Install O-ring seal (5), (4), and (3) on pilot relief valve (2).
Illustration 7 g01216034
Install pilot relief valve (2) in the oil filter base. Tighten the pilot relief valve to a torque of 118 10 N m (87 7 lb ft).
Illustration 8 g01216033
Close door (1).
Cat SIS web machinery list:
Parts glass Caterpillar catalog:
307C, 307D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320C, 320D, 320D FM, 320D G...
307C, 307D, 311C, 311D LRR, 312C L, 312D, 315C, 315D L, 318C, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D LRR, 320D RR, 322C, 323D L, 324D, 324D L, 325C, 325D, 325D L, 325D MH, 329D L, 330C L, ...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
312C, 312C L, 315C, 318C, 319C, 320C, 322C, 325C, 330C, 330C L, M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR,...
3531937
GLASS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
3531938
GLASS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
3531939
GLASS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
3531912
GLASS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
1961469
GLASS
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
1961471
GLASS
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
2105789
GLASS
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
2105791
GLASS
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
2597325
GLASS
308D, 314C, 314D LCR, 321C, 321D LCR, 328D LCR
308D, 314C, 314D LCR, 321C, 321D LCR, 328D LCR
1961437
GLASS
308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
1961495
GLASS
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
2141234
GLASS
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
2105792
GLASS
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR