GLASS-REAR 2333235 - Caterpillar

Install two O-ring seals (25) on the torque converter.
Illustration 62 g00511060
Install dowel (24) in torque converter housing (3).
Illustration 63 g00511059
Install two plugs (23) and two O-ring seals on torque converter housing (3).
Illustration 64 g00511057
Install orifice plug (22) in torque converter housing (3).
Illustration 65 g00511056
Install two plugs (21) and two O-ring seals on torque converter housing (3).
Illustration 66 g00511053
Install gasket (18), two oil level sight gauges (19), and two grommets (20) on torque converter housing (3).
Illustration 67 g00511052
Install plate (17), eight washers, and eight bolts (16) on torque converter housing (3).
Illustration 68 g00511051
Install support (15), four washers, and four bolts (14) on torque converter housing (3).
Illustration 69 g00511457
Install mud flap (13), eight nuts (12), eight washers, and eight bolts (11).
Illustration 70 g00511047
Illustration 71 g00511046
Use Tool (A) and a suitable lifting device to install torque converter housing (3) on the torque converter. Torque converter housing (3) weighs 329 kg (725.3 lb).
Install 17 bolts (10) on the torque converter.
Illustration 72 g00511044
Install O-ring seal (9) on baffle (8).
Illustration 73 g00511043
Install baffle (8), six washers, and six bolts (7) on torque converter housing (3).
Illustration 74 g00511041
Install O-ring seal (6) on cover (5).
Illustration 75 g00511038
Install the screen. Install cover (5), four washers, and four bolts (4) on torque converter housing (3).
Install cover gasket (2), six washers, and six bolts (1) on torque converter housing (3).End By:
If necessary, install the two sensors for the Wiggins Service Center.
Install the torque converter screen. Refer to Disassembly and Assembly, "Screen (Torque Converter) - Install".
Install the lockup clutch and synchronizing valve of the torque converter. Refer to Disassembly and Assembly, "Lockup Clutch and Synchronizing Valve - Remove and Install".
Install the torque converter outlet relief valve. Refer to Disassembly and Assembly, "Relief Valve (Torque Converter Outlet) - Remove and Install".
Install the torque converter inlet relief valve. Refer to Disassembly and Assembly, "Relief Valve (Torque Converter Inlet) - Remove and Install".
Install the transmission and torque converter pump. Refer to Disassembly and Assembly, "Gear Pump (Torque Converter and Transmission) - Install".
Install the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Install".