3836932 GLASS Caterpillar parts
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
Rating:
Alternative (cross code) number:
CA3836932
383-6932
3836932
CA3836932
383-6932
3836932
Weight: 41 pounds 18 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 3836932:
Number on catalog scheme:
5
For full view, you need register
Information:
1. Put the fuel injection pump housing on bracket assembly (A).2. Install timing pin (C) to hold the camshaft. Be sure the pin that holds shaft (22) is in position on the back of the flyweight assembly.3. Put flyweight assembly (21) in position on the camshaft.4. Install the bolts that hold the flyweight assembly to the camshaft and tighten them to a torque of 13.6 2.8 N m (120 24 lb in) for earlier governor and 10.2 1.1 N m (90 10 lb in) for later governors with thin bolt heads.5. Remove timing pin (C). 6. Put shield (19) in position over the flyweights. 7. Use driver (D) to install the shield the remainder of the way on to the camshaft. Move the metal (stake) at two places on the shield 180° 5° apart to hold the shield on the camshaft. 8. Put a new O-ring seal on dowel (17) and install the dowel in the pump housing. Make the dowel even with the machined surface of the counterbore on the outside of the housing.9. Put lever (18) on dowel (17) and install the ring that holds it on the dowel.10. Install screw (14) and nut (16).11. Install pin (15). 12. Put torque spring assembly (12) in position on the housing and install bolts (13). 13. Install cover (10).14. Put thrust collar (11) in position between the flyweights. Lift the flyweights up with a piece of wire and push thrust collar (11) forward. 15. Put lever (9) in position in the housing and in the groove of the thrust collar. Put a new O-ring seal on the shaft and install shaft (8) down through the housing and into the holes in lever (9). 16. Install cover (3).17. Install spring (6) and seat (7).
Both springs must make full contact on seat (5) before they are installed in the governor housing assembly. If the springs do not make full contact on the seat, high idle speed will not be correct and low idle governor surge can be the result. Low idle setting without stability can also be the result.
18. Install seat (5) and two springs (4) in the governor housing.19. Install governor housing (2) and bolts (1).End By:a. make an adjustment of the fuel system setting (See Fuel System in Testing & Adjusting)b. install fuel injection pump housing & governorSeparate Fuel Injection Pump Housing & Governor (Serial Numbers 90N6121-Up, 75V1-Up)
Start By:a. remove fuel injection pump housing & governor 1. Install the fuel injection pump housing on tool (A).2. Remove bolts (1) and governor housing (2). 3. Remove two springs (4) and seat (3). 4. Remove spring (6), seat and piston assembly (9), and spring (8) from shaft (7).5. Remove cover (5). 6. Remove shaft (10) and lever (11). 7. Remove thrust collar (13).8. Remove cover (12). 9. Remove two bolts (14) and torque spring assembly (15). 10. Remove pin (16).11. Remove screw (18) and nut (19).12. Remove the ring that holds the lever and
Both springs must make full contact on seat (5) before they are installed in the governor housing assembly. If the springs do not make full contact on the seat, high idle speed will not be correct and low idle governor surge can be the result. Low idle setting without stability can also be the result.
18. Install seat (5) and two springs (4) in the governor housing.19. Install governor housing (2) and bolts (1).End By:a. make an adjustment of the fuel system setting (See Fuel System in Testing & Adjusting)b. install fuel injection pump housing & governorSeparate Fuel Injection Pump Housing & Governor (Serial Numbers 90N6121-Up, 75V1-Up)
Start By:a. remove fuel injection pump housing & governor 1. Install the fuel injection pump housing on tool (A).2. Remove bolts (1) and governor housing (2). 3. Remove two springs (4) and seat (3). 4. Remove spring (6), seat and piston assembly (9), and spring (8) from shaft (7).5. Remove cover (5). 6. Remove shaft (10) and lever (11). 7. Remove thrust collar (13).8. Remove cover (12). 9. Remove two bolts (14) and torque spring assembly (15). 10. Remove pin (16).11. Remove screw (18) and nut (19).12. Remove the ring that holds the lever and
Cat SIS web machinery list:
Parts glass Caterpillar catalog:
307C, 307D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320C, 320D, 320D FM, 320D G...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR,...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 323D LN, 324D, 324D ...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
3872847
GLASS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L, ...
4263899
GLASS
M315D 2, M317D 2
M315D 2, M317D 2
3836929
GLASS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
3836931
GLASS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
3846534
GLASS
312D, 312D2 GC, 313D, 313D2, 318D L, 318D2 L, 320D GC, 320D2 GC
312D, 312D2 GC, 313D, 313D2, 318D L, 318D2 L, 320D GC, 320D2 GC
3836933
GLASS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
3535917
GLASS
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
3490089
GLASS
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 324E L, ...
312D, 312D L, 312E, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E LN, 328D LCR, 329D,...
3423703
GLASS
311D LRR, 312D L, 319D LN, 320D L, 320D LRR, 324D L, 328D LCR, 329D L
311D LRR, 312D L, 319D LN, 320D L, 320D LRR, 324D L, 328D LCR, 329D L
3872847
GLASS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...